Device Configuration

Owned by arkadi kaplon
Last updated: 20.12.23
2 min read

The configuration display defines the layout of the site and is used as part of the Galooli solution configuration.

There are two sections on the device configuration tab:

Layout section

The purpose of this section is to determine the correct layout of the organization. A layout is a method of correctly associating the information collected by the Galooli gateway with the system. It is crucial that the layout of the system be selected appropriately and according to the organization's requirements so that all the alerts and the display of data will function as expected.

The layout code is built from a number of sections, each section affects different aspects of the site. For example, “MICROGRID_GENERIC_OUTDOOR_OFFGRID_HYBRID_SOLAR_STORAGE”.

Code Part

Explanation

Code Part

Explanation



TL

MICROGRID

GEN

IOT

This is the organization's prefix.

Select the letters of the prefix relevant to your organization's purpose.

TL = Telecom Site

MICROGRID = Microgrid Site

GEN = Generator (Elara/K2)

IOT = Internet of Things.
Devices with no power, tracking or fleet characters.

The second part of the code will include:

The name of the project
or
The word “GENERIC” if there is no name for the project


Name of the project = The tenants list of telecom site is affected by the layout code.

Generic = Generic Layout. For projects without a dedicated layout.

INDOOR

A shelter or office houses the different gateways, sensors, accessories, and devices on the site

OUTDOOR

There is an electricity closet on the site that houses all of the gateways, sensors, accessories and devices on the site.

ONGRID

There is a permanent connection to the grid at the site

OFFGRID

There is no permanent connection to the grid at the site

HYBRID

When a site uses several energy sources simultaneously, the battery is an integral source of energy and not just a backup

SOLAR

There is a permanent connection to the solar panels at the site

STORAGE

An indicator applicable to Microgrid sites that indicates the presence of batteries

WIND

There is a permanent connection to the wind source at the site

Configuration section

The configuration section is divided into different categories and contains sections relevant to each category. Please refer to the following link for more detailed information