Power Center Elara SNMP Device Configuration

Device
As a list of accessories and devices supported by the Elara, each part changes depending on the element selected in the part above it.

Force default Items
After selecting the device, the default parameters will appear automatically.

Device IP
The IP address of the device itself

Virtual Device ID
A virtual number within the Galooli system identifies the device.

Linked Device
A way to configure multiple devices with the same virtual ID.

The goal is to build one device that will combine data from physically different components (for example, the battery voltage from one device that measures voltage and the battery state of charge from another device that calculates percentage).

The "Linked Device" should be marked to identify the linked device. The device will be considered a primary unit if the "Linked Device" is not marked.

Community
The community is a type of shared password between the SNMP management station and the device, which is used to authenticate the SNMP management station. Communities are only defined in SNMPv1 and v2 because SNMP v3 works with users instead of communities.

Version
SNMP version

Traps OID Code
TBA

Traps OID Status
TBA

Traps Active Value
TBA

Start Delay [mS]
TBA

Query Delay [mS]
TBA

Query Timeout [mS]
TBA

Query Retries
This parameter determines the number of times to remain in each register or object before concluding that communication is not normal. In general, the default value is 2 and this is the recommended value. it is recommended that you consult Galooli's support if you wish to change this value.

Connecting Timeout [mS]
This parameter determines whether or not the communication status should be checked prior to initiating the information request, and for how long. The default value is 0 and this is the official recommendation.