/
Control Story

Control Story

Owned by arkadi kaplon
Last updated: 31.12.24
3 min read

 

 

Empowers users to remotely manage generators and other power systems, allowing efficient control over operations like starting, stopping, and testing. It also enables alarm reset and mode selection, improving response time to issues.

Control and monitoring buttons, depending on the asset and what it supports.
This story appears in the app when the following two conditions are met:

  • The user has permission to control ability

  • There is a connection to the panel of the generator/invertor/rectifier

image-20241231-112107.png

Rectifier Control

  • Rectifier control allows you to reset the rectifier (Available only for Vertiv M830B NCU rectifier model)

image-20241231-112144.png

Inverter Control

  • Invertor control allows you to start or stop the invertor remotely.

  • Reset option allows you to reset the alarms of the invertor.

Generator Engine

  • Engine Control allows you to start or stop the generator remotely

Generator Modes

  • Modes Control includes a variety of modes of the generator

Generator Alarms

  • Alarms Control allows you to reset the alarms in both generators

 

X-Ray

Allows the execution of the X-Ray service upon clicking, eliminating the need to wait for the mechanism's automatic daily run. Clicking the button will also trigger the “SET” command if one has been defined at the X-Ray site level.

  • When a request is sent, it may not be executed immediately. Instead, it will enter a queue managed by the server.

  • The button will be enabled for users with Control Commands set to True. For all other users, the button will be disabled.

  • After clicking the “Scan” button:

    • If no request is in the queue: A confirmation message will appear—"Are you sure you want to proceed?” This action will send a command to the system.

    • If a request is already in the queue from the last 24 hours, a notification will appear: "Scanning is already in progress. Please wait for it to complete." This ensures no duplicate requests are sent within a 24-hour period.

Immobilizer

  • Once you click Immobilize, the car’s ignition will not start. Please note: cars in transit will continue running until the engine is off.  To cancel the immobilization just click Mobilize.