CE Transducer CE11 - Connection to the Computer
- arkadi kaplon
Owned by arkadi kaplon
It is highly recommended that you perform this step within the office before you leave for the field
Power the device by wiring it to 12V according to the below diagram:
2. Connect the RS485 wires - ports 8 & 9 - to the RS485 USB Converter.
3. Connect the RS485 converter to the PC/laptop and connect the other ends of the wires to that DC meter
RS-458 Adaptor connected to the PC
Â
Pin# | Name |
|---|---|
1 | Voltage measure (+) |
4 | Voltage measure (-) |
5 | POWER (12V) |
6 | GND (-12V) |
8 | RS485 B |
9 | RS485 A |