Acrel PZ72L DC Meter (Supported Product)

Single channel DC

Open

• Network configuration for RS485 connection

Open

• RS485 Wiring diagram

Open

• Manual ID Setting
  1. Connect the DC meter to a power source
  2. Click “Set”
  3. Click on one of the “arrow” buttons until you reach “0001” and click on “Enter”
  4. Click on one of the “arrow” buttons until you reach “bus” and click on “Enter”
  6. You should see "Addr" on the screen. If you do, click "Enter"
  7. Select the appropriate ID via the "arrow" buttons and click "Enter"
  8. Click “Set” twice
  9. When you see the “Save” word on the screen, click “Enter”
  10. Click on the right “arrow” button to reach the “YES” and click “Enter”