Report Templates
Discover actionable insights with our one-click reports. You can use report templates to generate reports that we have prepared specifically to save you valuable time as well as get the most useful data from Galooli.
There are 8 categories of templates available: Site Efficiency, Colocation, Fleet, Generators, Grid, Solar, Storage, System Tuning.
Each template contains a summary of all the benefits and advantages. Hovering over each template will reveal additional information.
In each report, there are default parameters, including aggregation and time range. It is recommend using these defaults.
In addition, each template will indicate whether it is a dashboard or a report and what type of report it is
Templates List
Site Efficiency | Colocation | Fleet | Generators | Grid | Solar | Storage | System Tuning |
|---|---|---|---|---|---|---|---|
Critical Inefficiency Events Dashboard
| Tenants Excess Energy
| Trips Analysis
| Generator Hours Exceed KPI
| Grid High Voltage
| Low Solar Contribution
| Battery Replacement - Low SOH
| Technical Configuration |
Solar and Battery Charge Optimization
| Colocation - Tenants with 5% Downtime | Abnormal Fuel Consumption | Fuel Efficiency
| Low Grid Availability
| Low Solar Efficiency | Battery Overheating | Units Availability |
Redundant Generator Usage
| Tenant Availability and Usage Alarms
| Vehicle Events
| Operational Load Analysis
| Grid Energy Usage During Peak Hours
| Solar Power and Consumption Comparison | High Charge Current
|
|
Underused Batteries in Hybrid Sites |
| Generator Hours Exceed KPI
|
|
| Insufficient Solar Power for Consumption | Consistently Low Battery Level
|
|
Underused Batteries in Hybrid Sites |
| Fuel Efficiency
|
|
|
|
|
|
Battery Charge Energy Source |
| Operational Load Analysis |
|
|
|
|
|
Templates Usage
Follow these steps to use the report templates:
Find the relevant category of reports among the five categories. Use the search bar or scroll through the different templates.
Select the template you wish to use. There will be an automatic transfer of all fields from the report to the "Selected Fields" location.
You are now able to make your own changes and adjustments as needed.
Select the relevant units from the organization tree for which you wish to run the report.
It is recommend to use the default aggregation and time range.
Run the report or save it for later use.
