The Fleet tree provides a visual representation of an organization's hierarchical structure. The fleet is made up of the organization itself, the cluster, the group, and, eventually the unit (a vehicle).

Whenever the user clicks on an organization, cluster, group, or unit, the Fleet display changes accordingly.

1 The Hierarchy
2 Fleet Search Bar
3 Vehicle Status Modes
4 Property Value Display
5 Filtration Options
6 Immobilize/Mobilize tool

The Hierarchy

Here is an explanation of the hierarchy of the organization tree - Organization Tree Section

Fleet Search Bar

The search bar allows you to locate specific vehicles within a cluster or group. By entering the name of the vehicle or cluster/group, the fleet tree will filter out the information that is not relevant.

In addition, you have the option of expanding or reducing all the clusters and groups of the organizational tree by selecting the following option:

Vehicle Status Modes

The following table contains the status icons and descriptions of their functionality:

In Hierarchy Menu	Functionality Description

In Hierarchy Menu	Functionality Description
	On Mode = Device is online and transmitting OTA via GSM, key is in ignition switch under ON.
	Off Mode = Device is offline as the engine of the car was shut down.
	Immobilized Mode = Upon triggering the immobilizer, once the vehicle comes to a full halt, the driver will not be able to turn on the engine again until the device is mobilized.
	No GPS Mode= The unit was unable to obtain GPS coordinates of its current location, and will not show up on the map view and / or the device was not able to connect to the server for over 48 hours.
	Disconnected Mode = The device was not able to connect to the server for over 48 hours.
	Idle Mode = Device is online and transmitting OTA via GSM, key is in ignition switch under ON , the car is running idle for over 5 minutes or is stuck in a traffic jam.

Property Value Display

One of the most interesting features of the Fleet platform is that it allows the user to instantly view performance data relevant to the unit itself.

This information can be selected using 4 individual icon controllers:

Icon	Application	Results Upon Selection

Icon	Application	Results Upon Selection
	Speedometer
	External Battery Voltage
	Vehicle Fuel Level
	Odometer

Location of the controllers:

Filtration Options

The Filtration Options sub-menu allows the user to filter out vehicles through the following means:

Filtration Name	Filtration Type	Selection Options	Image

Filtration Name	Filtration Type	Selection Options
Status	Check mark	On/Move Off Idle Disconnected Immobilized
Battery Voltage	Top & Bottom threshold range	Setting an upper and lower threshold in order to control the unit selection options
Fuel Level	Top & Bottom threshold range	Setting an upper and lower threshold in order to control the unit selection options
Odometer	Top & Bottom threshold range	Setting an upper and lower threshold in order to control the unit selection options

Location of the filtration sub-menu:

Upon utilizing any of the filtration methods, the filter icon will change its color to light green

Immobilize/Mobilize tool

This feature is entirely dependent on the type of Galooli device you have & if it was installed with an immobilizer relay.

The user may “Immobilize” or “Mobilize” a particular vehicle at any time.

Command	Meaning

Command	Meaning
Immobilize	Rendering the vehicle undriveable
Mobilize	Rendering the vehicle drivable

Note that the immobilization will take effect only after the vehicles have reached a complete halt

Location of the controller:

Upon clicking on the key controller, the user may click on immobilize or mobilize to execute the command

Galooli Knowledge Base

Fleet Tree Structure