The latest version of the Galooli solution incorporates features that reflect our open dialogue with our customers and Galooli's desire to facilitate and improve the system's use. The purpose of this article is to provide information about the main features of this version.

General Updates

Desktop Notifications

The new Galooli Solution notifications indicator enable users to receive real-time desktop notifications for specific events, with an option to include sound alerts.

Notification Set

Notification Display

New User & Reset Password Changes

Here are the updates and improvements made to the display of password reset and configuration:

Password Setup Email (New User)	Password Setup Screen (New User)	Password Change (Forgot Password)	Password Setup Screen

Password Setup Email (New User)	Password Setup Screen (New User)	Password Change (Forgot Password)	Password Setup Screen

Galooli Ultragate Installation & Configuration

A new document describing the installation and configuration of the Galooli Ultragate gateway has been added to the Galooli Knowledge Base. Have a look.

Installation Process Outline

An updated version of Galooli's "Installation Process Outline" can be found in the knowledge base of Galooli.

End Of Sale Announcement

The DC-DC Converter (20W CUI) end of sale date is on 01/01/2025. This converter was used as part of Galooli's tray/metal box, which has now been replaced by a new converter called DC-DC Converter (DDR-60).

Linux Gateways Version

Galooli Linux gateways hardware versions have been released - Linux Gateways (g5) Versions

Elara Gateway Version

Galooli Elara gateway hardware versions have been released - https://galooli.atlassian.net/wiki/x/IIEiqg

Power Center Versions

New versions of the Power Center was released - https://galooli.atlassian.net/wiki/x/AQDk1Q

New Rectifier Models Support

Galooli now supports the following new rectifier models:

Two new Eaton rectifier models: the SC200 and SC300 - Eaton
ZTE_CSU603 model - https://galooli.atlassian.net/wiki/x/2wBakg

New AC Meters Support

Galooli now supports three new AC meters:

New DC Current Ring Support

Galooli now supports a new Acrel DC current ring model: DC Current Ring 1000A - https://galooli.atlassian.net/wiki/x/AYD-2

New Smart Batteries Support

Galooli now supports two new Smart Batteries manufacturers:

Changhong - https://galooli.atlassian.net/l/cp/hmD6UzFd
Leoch - https://galooli.atlassian.net/l/cp/ayH113g9
Sacred Sun - https://galooli.atlassian.net/wiki/x/AQCQ2w

New Inverter Charger Support

Galooli now supports a new Delta Inverter Charger - Delta DPH Series80 UPS Inverter Charger

Panorama Application

Master Filter

The Master Filter feature enables dashboard elements, such as pie and chart segments, to act as primary filters. This functionality allows users to filter the entire dashboard with a simple click on any pie/chart segments part, enhancing interaction by enabling seamless drill-downs and deeper data exploration.

This functionality is available in both the “Dashboard Designer” and the 'Analytics Mode' of the Panorama application.

Step 1 - Configuration in the Dashboard Designer (Pro)

Step 2 - Filtration of the dashboard in the Analytic mode (Panorama).

Execute Unit Dashboard

A new feature of the Galooli AI-Based Analysis Dashboards Collection allows users to quickly and conveniently switch from a multi level view to a single unit view.

Multiple Grid Suppliers

A new feature has been added to the Panorama live view to display an additional Grid connection in cases where two companies supply electricity to a specific site. The data for each connection is separate and measured independently; however, the “Site Status” card will still display only one connection based on the company currently supplying power to the site.

Under each Grid logo, a dedicated name for that Grid will appear, allowing users to easily identify which company is currently providing electricity to the site.

In addition, new summary fields have been added to the system to display information about the second Grid.

In the unlikely event that both power sources (Grid 1 and Grid 2) supply electricity simultaneously, the priority will be given to Grid 2.

The report system fully supports this functionality.

Live View New Inverter Display

A new display option has been added to the Inverter card in Panorama called “UPS”.
UPS refers to an “Uninterruptible Power Supply” device.

The expanded card view will include information on the Battery power, AC1 power, and AC2 power.

Support For New Languages

From this version, the Panorama application supports the following languages:

English
Deutsch
Russian
Spanish
Portuguese
French

The language selection process is performed during system login.

Site Status & Generator Alarms Indications

As of this version, the following alarms will affect the notification indication on the Site Status Card:

Site Global Generator X High Load
Site Global Generator X Very High Load
Site Global Battery High Current
Site Global System High Voltage

In addition, a progress bar will appear in the event of overload, indicating the severity of the load on the Generator:

High: Yellow
Very High: Orange
No Alarm: Green

New Oil Parameters Support

A new support for “Oil Metrics” has been added to the system.

Live View

Table Mode View - Building Global Section:

Boiler Oil Fill Level (%)
Boiler Oil Level [Volume]

Table Mode View - Meters Section:

Meter X Oil Percentage
Meter X Oil Volume

The reports have been updated with the relevant data as well.

Rectifier Card Updates

The “Used Capacity” field in the extended Rectifier card will now be displayed as a percentage.

A new sub-card has been added to the extended Rectifier card, displaying the AC Voltage and AC Current fields for each phase.

Rectifier Mains Failure Criticality Change

The severity of the alarm for "Rectifier X Internal Mains Failure" has been changed to "Indication."

Pro Application

New Pie Item - Values Only

A new component has been added to the Dashboard Designer: Pie - Values Only.

Unlike the existing Pie component, the new component allows users to select only values (without arguments) and view their distribution by percentage, number, or both.

Example Use Case: A clear representation of the energy source distribution compared to energy consumers.

Rear More - https://galooli.atlassian.net/wiki/x/EoDjqg

Dashboard View Options

A variety of new options have been added to the Dashboard Designer actions, enhancing customization and functionality:

Allow Filters: This option enables users to apply filters to the dashboard data when accessed through the Panorama Analytics view.
Allow View Report: This option allows users to view the fields used to build the dashboard when accessed through the Panorama Analytics view.
Refresh Every X Minutes: This option sets an automatic refresh interval for the dashboard when accessed through the Panorama Analytics view. The minimum refresh interval is 10 minutes, and the maximum is 999 minutes. The default interval, when activated, is 60 minutes. This feature is applicable only to Asset, Event, and Detailed reports.

New Graph Display

A new option to display a summary report as a graph display has been added to the Report View window. The graph is similar to the one available for detailed reports.

Support For Multiple Filtering

We’ve added support for filtering multiple values within fields in the reporting mechanism. The new filtering option is called “One Of / Not One Of”.
For example, users can filter units whose status is “On”, “Idle”, or “Moving”. Alternatively, users can filter units whose status is “not Off” or “Disconnected”.

“One of” Filter

“Not one of” Filter

Fuel Data Improvements

Some useful changes have been done to the Galooli fuel consumption logic in order to:

Enhance data quality of the fuel and the descriptions provided by the Fuel Data Quality fields.
Improve our assessment when reliable data is unavailable, specifically to determine the site's actual fuel consumption.

The improvement has been achieved through the following changes:

Data Quality

“The Fuel X - Data Quality [%]” field will return the value “-9999” if there are no engine hours and fuel consumption exceeds 2 liters. This ensures you can easily filter the relevant data.
“Fuel X Data Quality Possible Reasons” will present a brief description that enables filtering the field results.

For a more detailed and accurate description, refer to the “Low Fuel Data Quality Active/Description/Activation Date” field.

Fuel Consumption

"Generator X Operational Consumption [Liter/H]" field name changed to: "Generator X Fuel Sensor Operational Consumption [Liter/H]"
The logic behind "Generator X Load Based Fuel Consumption [Liter/H]" filed has been updated. The calculation of fuel consumption is now based solely on a formula, which accounts for the generator's size and load.
"Generator X Galooli Operational Consumption [Liter/H]" is a new field that checks whether the fuel sensor readings fall within the expected range (internal Galooli data) based on the generator's size (KVA). The field will provide an assessment only if the value falls outside the expected range.

New Grid & Battery Duration Summary Fields

Four new summary fields have been added to enhance energy monitoring and planning:

Grid Outage
- “Grid Outage Average Time” and “Grid Outage Maximum Time”. Those fields now provide insights into the frequency and duration of grid outages at each site. These metrics assist in battery backup planning and in identifying grid-related issues.
Battery Discharge
- “Battery Discharge Average Time” and “Battery Discharge Maximum Time”. Those fields allow for detailed analysis of battery performance, helping to verify autonomy calculations and detect potential faults.

The calculations account for complex scenarios, including outages and discharges spanning multiple days, ensuring accurate and actionable data.

New Aggregation Option

We've added a new aggregation option called “Span” for numerical fields. The aggregation menu appears after a right-click at the bottom of each column. The “Span” aggregation will return the result of subtracting the minimum value from the maximum value for the selected column.

Extended Report End Time

Starting from the upcoming version, we will support Report End Time > Now (i.e., the report end time is greater than the current time on the computer running the report) and up to the end of the following day.

This change was implemented to allow users in GMT+12 to run reports even when they are not physically located in their organization's country.

Changes to Alarms Names

Old Name	New Name

Old Name	New Name
Rectifier_X.Alarm Internal Ua High	Rectifier_X.Alarm Internal high current
Rectifier_X.Alarm Internal Ua Low	Rectifier_X.Alarm Internal low current current
Rectifier_X.Alarm Internal Us High	Rectifier_X.Alarm Internal high voltage
Rectifier_X.Alarm Internal Us Low	Rectifier_X.Alarm Internal low voltage

New Rectifier Ambient Summary Fields

New summary fields for rectifiers (1-5) have been added to the system:

Max Ambient Temp [Celsius]
Min Ambient Temp [Celsius]
Avg Ambient Temp [Celsius]

New Grid Summary Field

Grid Meter 1-2 - Availability Time is a new field in the “Energy Devices” group. The field indicates the duration for which the meter has recorded power greater than zero, effectively determining which of the grids is active.

Smart Batteries - Summary Fields Rename

The names of the summary fields displayed for smart batteries have been updated:

Old Name	New Name

Old Name	New Name
Battery X Alarms Active	Battery X Alarms Critical
Battery X Fault 1 Active	Battery X Alarms Non Urgent
Battery X Fault 2 Active	Battery X Alarms Indication
Battery X Warnings Active	Battery X Alarms Urgent

Unconfigured Tenants

The system will not perform summary calculations for unconfigured tenants (Tenant x Assignment = Unknown) in the following fields:

Tenant X Initial kWh
Tenant X Final kWh
Tenant X Total kWh
Tenant X Total Generator kWh
Tenant X Total Non-Generator kWh
Tenant X Min/Max/Avg Current
Tenant X Min/Max/Avg Voltage
Tenant X Min/Max/Avg Power
Tenant X Power Availability
Tenant X Load Availability
Tenant X Accumulated Consumption

Rectifier Fields Removal

The "Rectifier X Generator Signal" field has been hide from the Panorama Live display – in the extended card view for Rectifiers .The alarm is available in the standard list under the Table View in Panorama. Instead, an alarm (with severity "Indication") has been added to the Rectifier card. The alarm will be displayed when “Rectifier_X.Alarm Internal Generator Signal” = True.

Inverter Solar Alarms

The fields “Alarm Internal Solar X” have been removed from Panorama and Pro applications.

In their place, an analog system parameter for the inverter has been added, along with separate analog system parameters for each alarm severity level: Indication, Non-Urgent, Urgent, and Critical.

Scheduled Reports Failure

We updated the handling of scheduled report failures.

Previously: The user associated with the scheduled report would receive an email notification for each report failure (up to 15 failures, after which the report would be automatically canceled).

Starting with the upcoming release: The user will no longer receive notifications for individual failures. Instead, an email will be sent only after the 15th failure, notifying both the user and the Galooli Support team that the report has been canceled due to an issue.

Manager Application

My Users

Log In Indication

A new indicator has been added for users who have never logged in to the Galooli solution. When this occurs, the user's “Expiration Time” will be “N/A”, and their “Last Activity” will be “Never”.

Password Policy Requirements

We have added a list of passwords and conditions that cannot be used regardless of whether the password meets the requirements of the organization.

Editing New Users Email Address

Starting from this version, if the user has never logged into the system, it is now possible to edit their username (email address).

My Units

Group Unit Transfer

From now on, you can easily and seamlessly move multiple units between different groups.

My Units - New Device Configuration Sensors

Two new options have been added for sensor configuration under:
My Units → Edit Unit Screen → Configuration Tab → Device Configuration → Shelter X/Rectifier X:

Vibration Sensor
Motion Sensor

New Generator KPI Fields

New KPI fields have been added for generators (at both the organization and unit levels).

KPI Name	Default Value (relevant only for the organizational information)
High Frequency Threshold	53
Low Frequency Threshold	47
Low Oil Pressure Threshold	2.4
High Coolant Temp Threshold	90
Short Circuit Current Threshold	85
Over Current Threshold	45

Default values have been applied exclusively at the organizational level. Each organization can choose whether to copy these values to existing units.

Newly created units will automatically inherit the default values.

Time Offset

Starting with the next version, we will allow a time offset (GMT Offset) of +/- 23 hours.
Read More - https://galooli.atlassian.net/wiki/spaces/KP/pages/2572877929/Preferences#My-Preferences

Additional Info

There has been a change to the "Tech Information" field (under Additional Info --> Site Info --> Section: Site Access) from a read only field to an editable text field.
The following changes have been made to the "Grid" section under "Additional Info" for a unit:
- The field name “Grid Service Provider” has been changed to “Grid Service Provider 1”.
- A new field, “Grid Service Provider 2”, has been added.
- The field name “Meter Installation Date” has been changed to “Meter 1 Installation Date”.
- A new field, “Meter 2 Installation Date”, has been added.
- The field name “Meter SN” has been changed to “Meter 1 SN”.
- A new field, “Meter 2 SN”, has been added.

These renamed and newly added fields are available in the reporting mechanism (Pro/SDK).

A new option, “Oil Main”, has been added to the “Assignment” menu under “Additional Info” --> “Section: Meter X”.

My X-Ray New Items

The X-Ray tables for rectifiers have been updated with the following items:

BLV [SOC]
LVD [SOC]
PLD [SOC]
Generator Off [SOC]
Generator On [SOC]
Rectifier HS Gen Off off [SOC]
Peak Load Shift [SOC]
LVD Reconnect Solar

NOC Application

New NOC Alarm Type

A new alarm group, “Discrete Inputs,” has been added to the NOC alarms table, containing an alarm called “Digital 1-20”. These alarms will only be triggered if the corresponding digital I/O returns a "True" status.

Note: The alarms will not be activated if the relevant digital input (1-20) is not configured under My Units → Edit Unit → Configuration → I/O's → Input → Digital.

New NOC Alarms

Four new alarms have been added to the NOC application:

Location - Geofence Enter: The alarm is active when the unit enters the geofence
Location - Geofence Leave: The alarm is active when the unit leaves the geofence

Environment - Motion Alarms: Triggered when Shelter_X.Alarm_Internal_Motion (at least one) is “True”.
Environment - Vibration Alarm: Triggered when Shelter_X.Alarm_Internal_Vibration (at least one) is “True”.

Fuel Drop Alarm

The Fuel Drop alarm logic in the NOC application has been updated.

Previously the “Fuel Drop” alarm was automatically closed 60 minutes after its resolution. This duration was fixed (default) and could not be adjusted. Starting from the upcoming version, organizations will have the flexibility to configure the Release Delay Time to suit their specific needs.

NOC Alarm Removal

The NOC alarm "Inverter - Solar Alarm" has been removed.

Galooli Solution Version - November 24, 2024