Holykell HPT604 - Fuel Configuration

IOs Configuration

1. Enter the Manager application >> My units >> Locate the unit and click on it >> Click on the “Configuration” tab >> IO’s

2. Create two IOs (Analog input for the fuel measurement and Digital input for the fuel sensor connection status)

3. Analog Input

   • Select site_global.fuel_X

   • Check the main fuel tank

   • Give it a meaningful name

   • Select the relevant calibration table

   • Check the “Panorama Display”

   • Apply to save the data

4. Digital input

   • Choose site_global.fuel_1_disconnected

   • Give it a meaningful name

   • Display text: “connected-disconnected”

   • Check the “Panorama Display”

   • Apply to save.

Display Configuration

1. Enter the Manager application >> My units >> Locate the unit and click on it >> Click on the “Configuration” tab >> “Device Configuration” >> Section “Fuel” >> Check the “Fuel 1” and/or “Fuel 2”

2. Navigate to the Panorama application >> “Live” mode >> Locate the unit and click on it >> Locate the “Generator” card >> “Fuel Level” section >> Validate the fuel level indication

3. Record the fuel level value and input it in the calibration calculator section.

• If we get a match, continue to the next document
  
  

  Open

  

• Else, If we don’t, redo the calibration process.

Open

4. Save the table with the name of the site.