Holykell HPT604 - Calibration Table

Owned by arkadi kaplon
Last updated: 01.02.24
1 min read

  1. Log into Galooli solution

  2. Create a dedicated calibration table:

    • Go to Manager Application >> My Calibrations

    • Add new calibration

    • Give the calibration a meaningful name

    • Make sure to add the dimensions of the fuel tank under the description input text.

    • The calibration type = “Table”

    • The dimensions = “Volume”

    • The fuel mode = “None”

    • Check the “External Powered Sensor”

  3. Copy the data from the calibration table that you prepared in the previous chapter and click “Paste”

  4. Click “Add” in the end of the table creation