Vision Batteries

Supported Models

V-LFP48100

Communication Method

RS485 (Modbus)
Ethernet (SNMP) connection available via Megmeet Rectifier - Megmeet Rectifier Supported Smart Batteries

Wiring Diagram

Pinout	RJ45 side ports
1 or 8	RS485 B
2 or 7	RS485 A

Physical Installation

Device Configuration

For configuring the physical ID when there are one or more batteries connected to one another, the following actions must be taken. As shown in the table, the "ADD" part must be configured according to the number of batteries, on each battery separately.

Power Center Configuration

Supported Parameters

Power Center Parameters	System Parameters	Remarks

Power Center Parameters	System Parameters	Remarks
Voltage	Smart_Battery_X.Voltage [V]
Current	Smart_Battery_X.Current [A]
Temperature_1	Smart_Battery_X.Temperature_1 [Celsius]	Temperature 1 - Cell temperature
Battery_SOH	Smart_Battery_X.SOH
Battery_SOC_Percentage	Smart_Battery_X.SOC
Battery_Cycles	Smart_Battery_X.Cycles
Battery_Rated_Capacity	TBA

Alarms List

Critical	Non Urgent

Critical	Non Urgent

Galooli Knowledge Base