Ultragate Gateway

Owned by arkadi kaplon
Last updated: 13.11.24
3 min read

Ultragate gateway is an industrial computer that can be easily customized to meet your needs. Using the Ultragate gateway loaded with Galooli firmware, you can remotely manage, monitor, and control stationary assets, such as telecom sites, microgrids, rechargeable batteries, and generators.

A Ultragate device connects to all sensors, accessories, and devices, gathering data and sending it to the Galooli platform/servers.

ultragate_010724-20240911-055250.png

 

Galooli PN.

Galooli PN.

100-RTUSRULT-020

Features

  • Stable network transmission without downtime.

  • Abundant interfaces.

  • Multiple serial ports maximizing compatibility with external devices.

  • Customized expansion boards, allowing for custom expansion.

  • Convenient installation with options for mounting.

  • Supports GPS positioning.

Hardware Specifications

Operating System

Ubuntu 2

Operating System

Ubuntu 2

Processor

Quad-core ARM Cortex-A55 64bit CPU, up to 2.0GHz,RK3568

RAM

DDR4 4GB

Memory

eMMC 16GB is the default memory. A 32GB is optional.

NPU

1TOPS NPU, Support Caffe/Mxnet/TensorFlow/TF Lite/ONNX/Darknet models



Network Interface

Dual 10/100 Ethernet ports

2.4GHz/5.8GHz Wi-Fi 802.11b/g/n/ac (Optional)

4G mobile network

Bluetooth (Optional)

 

Defaulted IP:

  • ETH 0 Port 1: 192.168.1.11

  • ETH 1 Port 2: 192.168.100.55

SIM

1*SIM slot Nano-SIM(4FF)


LTE Frequency Bands

LTE-FDD B1/3/5/7/8/20
LTE-TDD B38/40/41
WCDMA B1/5/8
GSM/EDGE B3/8




GNSS

GPS, GLONASS, BDS, Galileo and QZSS
Protocol: NMEA 0183
Data update rate: 1 Hz by default
Sensitivity:
Acquisition Autonomous -146 dBm
Tracking Autonomous -157 dBm
Accuracy: Autonomous @ open sky 2.5

Display

1*HDMI OUT 2.0 ,4K 60fps

RTC

Built-in real-time clock battery, supports scheduled power on/off.


USB

1*USB3.0 HOST
1*USB3.0OTG


LED Indicators

WORK When the device is working properly, it blinks for 1s frequency
POW on when the gateway is powered up
DI n - on when the channel is activated by input signal
DO n - on when the channel output is activated

Can bus

1 CAN2.0 as default. CANFD is optional.

Button

1*upgrade for OTA, REC

Serial Ports

2*RS232 ,2*RS485

EMC level: IEC61000-4-2ESD, Level 2, class B, contact 4KV, air4 KV

Serial Signals

RS-232 5V/3.3V(output), TxD, RxD, GND
RS-485 5V/3.3V(output),A,B, GND



IO Interfaces

4 DI: dry/wet contact
DI voltage range 0-36V (Max. 36V), High 5-36V, Low 0-2V
2 DO: Relay
DO Max. 10A-277VAC/28VDC for NO,5A-250VAC for NC
4 AI: Voltage range 0-15v (Max.18V); Analog input Current range 4~20mA (Max. 40mA)
EMC level: IEC61000-4-2, Level 2, class B, contact 4KV, air 4KV


Power Supply

DC12V/2A
Connector: Jack Barrel Type DC5.5*2.1mm Round socket or 2 PIN terminal block
EMC level: IEC61000-4-2, Level 2, class B, contact 4KV, air 4KV

Operating Temperature

-10 - 70°C

Storage Temperature

-20 - 85  °C

Humidity

5% - 80%

Dimension

210mm*106mm*50mm

Installation

Panel mounting, DIN-Rail mounting



International Protection (IP Code)

IP30.

  • If the Gateway is installed in a Galooli cabinet tray and the tray is inserted into a communication cabinet, then the IP Code is determined by the specific communication cabinet being used.

  • When the Gateway is inserted into Galooli's Metal Box Set, it will have IP codes corresponding to the Metal Box Sets - IP65


Certificate

CE

RoHS (in progress)

Pinout

image-20240613-130042.png

Front - from left to right

Top Side

Top Side

Pin#

Name

Description

Type

1

V1+

Voltage1 +

 

 

 

Analog

In order to connect the Ultragate analog inputs to the Galooli Tray/Metal box inputs, the connections should be made in the following order:

Ultragate V > Tray U-AN

Ultragate COM > Tray GND

 

 

 

 

2

I1+

Current1 +

3

Com1

N/A

4

V2+

Voltage2 +

5

I2+

Current2 +

6

Com2

N/A

7

V3+

Voltage3 +

8

I3+

Current3 +

9

Com3

N/A

10

V4+

Voltage4 +

11

I4+

Current4 +

12

Com4

N/A

13

V+

Voltage +

 

 

 

Digital

In order to connect the Ultragate digital inputs to the Galooli Tray/Metal box inputs, the connections should be made in the following order:

Ultragate D > Tray U-D

Ultragate COM > Tray GND

14

V-

Voltage -

15

D1

Digital 1

16

Com1

N/A

17

D2

Digital 2

18

Com2

N/A

19

D3

Digital 3

20

Com3

N/A

21

D4

Digital 4

22

Com4

N/A

Bottom Side

Bottom Side

Pin#

Name

23

DC 12V/2A

24

HDMI

25

AUD

26

ETH 0

27

ETH 1

28-29

2 - USB 3.0

 

 

30-31

2 - RS485

32-33

2 RS232

34

GSM

35

GPS

36

SIM

Back - from left to right

Pin#

Name

Description

Type

Pin#

Name

Description

Type

 

1

NO1

Normally Open 1

 

 

 

Output

COM1

Common 1

NC1

Normally Closed 1

 

2

NO2

Normally Open 2

COM2

Common 2

NC2

Normally Closed 2


3


L H G

L= Low
H = High
G = Ground

 

CAN

Dimensions

Â