Open

• Network configuration for ETHERNET/SNMP connection

• Network configuration for RS485 connection

• Smart Batteries Query

  • “Amogreentech” Smart Batteries
    
    

    Open

    

• RS485 Wiring diagram
  
  

• ETHERNET/SNMP Device Configuration
  
  

• RS485 Device Configuration
  
  
  

Implementing SNMP Integration

1. Ensure that the SNMP Protocol is active. if not follow the next step.
   
   

2. Get the MAC address of the rectifier controller for which you are enabling SNMP functionality. You can find the MAC Address on the rectifier controller or you can log into the rectifier and access it.

• When the Rectifier controller is out of its slot

• If you logged on to the rectifier

3. Please share the MAC address you obtained in the previous step with the Delta team in order to obtain the license key of the rectifier.

4. Once the license key has been obtained, return to the rectifier platform and locate the location for entering the key.

5. Enter the license key and accept the changes.

6. Once the license key has been entered, enable the SNMP protocol.

Supported Parameters (SNMP)