Skip to end of banner
Go to start of banner

Permission Management

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 83 Next »

General Permission

Permission Name

Permission Purpose

Platforms where changes are reflected

Tenants

The name of the tenants that the user can see information about them on the various Galooli platforms.

Separate the names of the tenants by a comma (“,”) without any spaces between the comma and the tenant's names

If the user is expected to see all tenants, the word "Any" should be used.

Colocation NOC

Power Consumption

Pro Reports

CPH Report

Subsidiary IDs

Internal Galooli ID's for accounting purposes

Admin

Clusters Permission

The Clusters tool allows the user to select which clusters and groups will appear across all Galooli platforms. to that specific user.

The Galooli user creation and editing process include some logic behind the scenes regarding cluster and group view permissions. The following table summarizes the logic. You can find more detailed information in the paragraphs following the table.

User Creation Logic

User Editing Logic

 

 

As a default, when you create a new user in the organization, the new user will inherit the same clusters and group view permissions as the original user

 

 

You have permissions to see all groups in a cluster

 

You have permission to see part of the groups in a cluster

As a default, you can add or edit view permission to another user in the organization based on your viewing permissions.

As a default, you can add or edit view permission to another user in the organization based on your viewing permissions however, if you add a new cluster to an existing user, he will get access to all groups in the cluster even if you do not have access to those groups.

User Creation Logic

As a default, when a user creates a new user in the organization, the new user will receive the same clusters and group view permissions as the original user.

For example:
User “A” wants to create a new user in the system. The user "A" has access to cluster "1" and groups "a", "b", and "c". As a default, if user "A" creates a new user ("B"), this new user will have access to the same cluster and groups as User "A".

User Editing Logic

The ability of a user to add/remove viewing permissions is limited to the level of the permissions he has. The editing user can add/remove viewing permissions to clusters and groups based on his viewing permissions. The logic for user editing can be divided into two main categories:

  • The editor has access to all groups in a cluster
    User “A” wants to add cluster 1 to user “B”. The user "A" has access only to cluster "1" and groups "a", "b", and "c" out of several clusters. Therefore, user "A" can only add this cluster and groups to user "B" and cannot see/add other clusters and groups.

     

  • The editor does not have permission for all the groups in some cluster
    User “A” wants to add cluster 1 to user “B”. The user "A" has access to cluster "1" and groups "a", "b", "c", but cluster "1" contains other groups that the user can't access ("d", "e", "f"). As a result of user "A" adding view permissions to cluster "1" to the user "B", user "B" will be automatically granted access to all groups in the cluster ("a”, "b”, "c", "d", "e", "f"), even if user "A" does not have view permissions for groups "d", "e", "f".

    Why?
    Due to the groups view permission editing logic, all groups under a cluster are viewable by default

Organizations Permission

Galooli's Organization tool allows multi-users to choose which organizations they can log in to across all platforms.

  • "All Organization" allows the user to view all the organizations within Galooli platforms, including any future organizations.

  • “Select All”

  • This section allows the user to select the relevant organizations that they wish to view in the Galooli platforms one by one or to mark the "Select All" check box, which will select all of the organizations. By selecting this option, no future organizations will be automatically added

General Authorization Permission

Permission Name

Permission Purpose

Platforms where changes are reflected



Disable User

The option of temporarily disabling the user. In the event that action is taken, the following consequences will occur:

  • The user will not be able to access Galooli platforms. Upon attempting to log in, the user will receive an error message indicating that he has been disabled and should contact the organization's administrator

  • Scheduled reports generated by the user will not be sent to recipients

  • The user's automations will not be executed

  • In the organization's user list, the user's name will be highlighted in red

Users with Edit/Full permission to the My Users module are capable of performing this operation. https://galooli.atlassian.net/wiki/spaces/KP/pages/2584182813/Permission+Management#Galooli-Manager-Permission






All Galooli platforms other

Live display access

Disabled - Blocking the login to Galooli platforms

ZonMax
Galooli Solution
Fleet
Mobile App
Panorama

Enabled - Allowing the login to Galooli platforms


Hardware Configuration Tools

Disabled - Hardware configuration tools will not be available to the user
Local Only - The configuration can only be updated and managed locally via serial connection
Local And Remote - Updates and configurations can be performed on a local network as well as via OTA
Full - Updates and configurations can be performed via a local network, OTA, and Direct/Cut Through. The "AT terminal" feature is included.



 Power Center

Configuration Center

Online Store

Inactive at this time

 

 

Auto-add clusters

 

A new user who is created in the system will automatically be able to see all the clusters, based on their authorization level

ZonMax
Fleet
Mobile App


Control Commands


Generator/Invertor/Vehicle Control

Galooli Solution
Mobile App
ZonMax

Galooli Manager Permission

In order to access the various menus in the "Manager" application, the user must have at least "Read-only" permissions, except for the following two menus that will remain accessible regardless of whether all menus are disabled:

Permission Name

Permission Purpose

Platforms where changes are reflected

 

 

Preferences

Disabled - The user will not see data about the Organization Preferences

 

 Manager application Preferences

Read-only - The user may see data about the Organization Preferences

Edit - The user may add/edit data of “My preferences” and “My Dimensions” menus only

Full - The user may add/edit all the data about the Organization Preferences

 

 
Access & Security

Disabled - The user will not see data about the access and security

 

 Manager application Access & Security

Read-only - The user may see data about the access and security

Edit - User can only remove users from the blacklist

Full - Users can see, edit, add and delete all the access and security data. Mandatory for “Reset All Passwords” tool.

 

 
Audit

Disabled - The user can not enter the Audit

 

 

Manager application Audit

Read Only - The user can enter the Audit menu but can not see the "Usage Report" button

Edit - The user can enter the Audit menu and use the "Usage Report" option

Full - The user can enter the Audit menu and use the "Usage Report" option

Account Balance

Disabled - The user will not see data about the account balance

Manager application Account Balance

Enabled - The user will see data about the account balance




My Units
Organization Management

Disabled - The user will be able to view the organizational information (in My Units and in the reporting), and to use the "KPI Breakdown". The user will not be able to change the values in the table.


 

 

Manager application

Read-only - same as Disabled

Edit - in addition to the view, the user will be able to edit the organizational information (if it is not read only).

Full - in addition to edit, the user can use the "Copy Settings" button.

My Units
Cluster Management

 

Disabled - User will not see clusters data window and “INFO” window



Manager application
My Units
Cluster Management

Read-only - User may see data about clusters

Edit - User may edit data in clusters

Full - Users can see, edit, add, clone, and delete data in clusters

My Units
Group Management

 

Disabled - User will not see groups data window and “INFO” window


Manager application
My Units
Group Management

Read-only - Users may see data about groups

Edit - User may edit data in groups

Full - Users can see, edit, add and delete data in the groups

My Units
Unit Management

 

Disabled - User will not see units data window and “INFO” window



Manager application
My Units
Unit Management

Read-only - User may see data about units

Edit - It is possible to edit the data of the units, but not the names and the “X-Ray Definitions” menu.

Full - User may edit existing data of the units including the unit name. Additionally, users will be able to add new units and delete existing ones. Users will be able to upload files as part of this service.

My Users

 

Disabled - The user will not be able to see any other users, only himself. It is possible for the user to change his own permissions but not choose the organizations

 

 

 

Manager application
My Users

 

Read -only - The user is able to see data about all users but is not able to edit any of the data about them, only himself, and is not permitted to select organizations.

Edit - The user has the permission to edit the data of the users and himself, but is not allowed to add or delete users, and is not permitted to edit organizations.

Full - It is possible for users to view, edit, add, and delete data belonging to all other users and themselves, and permitted to select organizations for other users and him self.

My Geofences

 

Disabled - The user will not see the Geofences Management menu

Manager application
My Geofences

Read-only - Users may see data about the Geofence management

Edit - User may edit Geofence data

Full - User can see, edit, add and delete Geofence data

My Assets

 

Disabled - User will not see data about a assets

Manager application
My Assets

Read-only - User may see data about a assets

Edit - User may edit assets data

Full - User can see, edit, add and delete assets data

My Calibrations

 

Disabled - The user will not see data about the calibrations

Manager application
My Calibrations

Read-only - The user may see data about the calibrations

Edit - User may edit calibrations data

Full - Users can see, edit, add and delete calibrations data

My Contacts

 

Disabled - The user will not see data about the contacts

Manager application
My Contacts

Read-only - The user may see data about the contacts

Edit - User may edit contacts data

Full - Users can see, edit, add and delete contacts data

My Versions

Disabled - The user will not see data about the version upgrades

Manager application
My Versions

Read-only - Users may see data about the version upgrades

Edit - User may see data and upgrade/abort versions

Full - User may see data and upgrade/abort versions, User can request free version and can choose Ota and Ota Batch version

My Digital Twin

Inactive at this time

Manager application
My Digital Twin

My Automations

 

Disabled - The user will not see data about the automation solution

Manager application
My Automations

Read-only - The user can see the existing automations in the table and the logs but cannot edit them and cannot add/remove automations

Edit - All capabilities except for "New" and "Remove" are enabled

Full - All capabilities are available

  • All automations created by all the users in the organization will be visible to a user with “Full” permissions to the “My Automations” module.

  • A user with “Full” permissions is only permitted to edit his own automations and view the automations of other users.

My Service Logs

 

Disabled - The user will not see the Activity tab

Manager application
My Service Logs

 

Read-only - User may see the data in the Activity tab

Edit - User may edit data in the Activity tab

Full - Users can see, edit, add and delete data in the Activity tab



My X-Ray

Disabled - The user will not see data about the X-Ray applications.

 

Manager application
X-Ray

 

Read-only - The user can view the X-Ray tables but cannot edit, add or remove tables.

Edit - The user can edit existing X-Ray tables

Full - In addition to edit, the user can add/ remove X-Ray tables

Forms Gate

 

Disabled - The user will not see data about the forms gate

Manager application

Forms Gate

Read-only - Users may see data about the forms gate

Edit - User may cancel the requests for data change

Full - User may cancel and approve requests for data change

Galooli Pro Permission

In order to access the various menus in the "Pro" solution, the user must have at least "Read-only" permissions. The user will be able to see only the "Pro" solutions icon without those minimum permissions, however, the icon will be grayed out and not clickable.

Permission Name

Permission Purpose

Platforms where changes are reflected

Pro
Permission level

Disabled - The user will not see data about the Pro

Pro

Read-only/Edit/Full - The user may add/edit/delete all the data in the Pro application

Galooli NOC Permission

In order to access the various menus in the "NOC" solution, the user must have at least "Read-only" permissions. The user will be able to see only the "NOC" solutions icon without those minimum permissions

Permission Name

Permission Purpose

Platforms where changes are reflected

 

 

NOC space
Permission level

Disabled - The user will not be able to access the NOC solution

 

 

 

NOC

Read Only - The user will be able to access the NOC solution and fully view all the alerts. The configuration tab will show but the user will not be able to change any detail. the user will not be able to clear nonactive alarms.

Edit - The user can open a ticket and clear non-active alarms

Full - The user will be able to make changes through the configuration tab

Galooli Apps Permission

In order to access the various menus in the "Apps" application, the user must have at least "Read-only/Enabled" permissions. The user will be able to see only the "Apps" application icon without those minimal permissions.

Permission Name

Permission Purpose

Platforms where changes are reflected

Apps
Power Consumption

Disabled - The user will not see data about the power consumption

Apps

Enabled - The user will see data about the power consumption

Apps
Colocation NOC

Disabled - The user will not see data about the colocation NOC

Apps

Enabled - The user will see data about the colocation of NOC


Apps
Grid Usage Report

Disabled - The user will not see data about the Grid Usage Report

Read Only - The user will see data and can execute the report

Edit - Same as read only

Full - Same as read only



Apps

 

Apps
CPH Report

Disabled - The user will not see data about the CPH Report

Read Only - The user will see data and can execute the report

Edit - The user will see data and can execute the report

Full - The user will see data and can execute the report

 

 

Apps

Apps

Grid Oracle

Disabled - The user will not see data about the Grid Oracle

Read only - The user will see data and can execute the report

Edit -  The user will see data and can execute the report

Full - The user will see data, execute the report and upload a file

Apps

  • No labels