New K1 - TBD
- arkadi kaplon
The XXXX is an advanced LTE vehicle terminal designed for reliable and secure telematics data collection. Equipped with GPS and cellular connectivity, the device enables real-time vehicle tracking, remote diagnostics, and seamless communication with fleet management platforms. Its compact design and robust performance make it ideal for a wide range of applications, including fleet operations, vehicle security, and asset monitoring.
Galooli PN. |
|---|
100-TrK14G-020 |
Features
Real-time tracking
Driving behavior analysis
Serial port (optional)
Over-speed alert
SOS alert
Tamper alert
Removal alert
Power-supply-cut alert
Low power alert
Vibration alert
Geo-fence
Hardware Specifications
Network | 4G & 2G |
Frequency | VL103D (L):
|
Location accuracy | <10 meters CEP |
Relay | Optional |
TTFF (open sky) | Avg. hot start≤1sec |
Indication | GPS (Blue), Cellular (Green), Power (Red) |
Battery | 270 mAh, 3.7V Li-Polymer battery |
Operating voltage | 9-90VDC |
Operating temperature | –20 ℃ to +70 ℃ |
Device weight | 55 g |
Device dimension | 92 mm*40 mm*20 mm |
Wiring/Pinout
8 Pin Standard Version
Interface | Color | Description |
|---|---|---|
V+ | Red | Power + (9-90V) |
V- | Black | Power - Ground pin |
ACC | Orange | Vehicle ignition detection |
Relay | Yellow | Cut-off vehicle fuel supply |
SOS+ | White | SOS Trigger Pin |
SOS- | Black | SOS Ground Pin |
Data A /Data B | Blue /Green | RS485 |
ADC | Purple | support 0-5V |
LED Indication
Power Status (Red)
Flicker Frequency | Description |
|---|---|
On for 0.3s and off for 0.3s | Low power |
On for 1s and off for 3s | Fully charged |
On for 0.1s and off for 3s | Working normally |
Solid on | Charging (Higher priority than the status of low power) |
Off | Battery is exhausted/Internal failure |
GNSS Status (Blue)
Flicker Frequency | Description |
|---|---|
On for 0.3s and off for 0.3s | Searching GNSS signal |
Solid on | Positioned |
Off | GNSS module is in sleep mode or not working |
Cellular Status (Green)
Flicker Frequency | Description |
|---|---|
On for 0.3s and off for 0.3s | Network initializing |
On for 1s and off for 3s | Receiving signal normally |
On for 0.1s and off for 3s | Network connected |
Solid on | Calling |
Off | No signal received/No SIM card |
Power supply Status (Red, Blue, Green)
Flicker Frequency | Description |
|---|---|
Red, Blue and Green on for 3s | Connected/Disconnected power supply |
SMS Configuration
TBD
Physical Installation
Product Setup
Prepare a micro SIM card that supports the same network with this device.
Remove the shell of device.
Insert SIM card into the slot and toggle the switch to ON.
Installation Recommendation
Please install the device under the guidance of professional personnel.
The device should face up to sky.
Metal thermal barrier or heating layer, which are always installed on windshield, may affect the signal, please avoid installing the device under these objects.
Configuration Center Configuration
TBD