All Versions

Vertiv - Solar modules OIDs update

Vertiv 830&820

Fix of upgrade issue

DELTA alarm_PLD was always on (debug) - fixed

Delta Orion - relevant only as a fix for 1.28

Delta traps – LVD/PLD added
Version upgrade fix (Power center)
ELTEK Solar total power – information restored

Eltek - Solar

Delta Orion - LVD+PLD only

Solar module 1-4 Voltage - DELTA - OIDs change

Delta Orion - Solar

EXICOM solar current OID
VERTIV M530B – new alarm codes
Solar modules #1 → 4 for the following rectifiers modules:
Delta
Eltek
Vertiv 830&820

Exicom - Solar
Vertiv 830&820 - Solar

Vertiv 530

Vertiv - Total KWH OID added .1.3.6.1.4.1.6302.2.1.2.9.2.0
EXICOM 

Vertiv 830&820

eth_VERTIV_M530B device added
eth_VERTIV_M830D_NCU was [eth_EMERSON_ANY]
eth_VERTIV_M820D_ACU_PLUS added (same as eth_VERTIV_M830D_NCU, which was eth_EMERSON_ANY)

Vertiv 530

Delta rectifier version 7.6 SNMP support

Delta Orion - version 7.6+

eSite (ex Flexensclosure) SNMP Rectifier Support
Emerson OID Update:
OID_EMERSON_Load_Total                       1.3.6.1.4.1.6302.2.1.2.18.19.0 (NEW)
OID_EMERSON_Solar_Power                    1.3.6.1.4.1.6302.2.1.2.17.5.0          3.2020
OID_EMERSON_Solar_Total_Power        1.3.6.1.4.1.6302.2.1.2.18.7.0          3.2020

eSite

Delta PSC3 support

Delta PSC3

ELTEK SMARTPACK S rectifier SNMP support

Eltek

Emerson – solar power OID’s correction
Emerson – updated new alarm codes
ELTEK SNMP support – device added

 Fix ZTE issue from version 1.17

Emerson - Battery current is byte size varient.. it changes according to the value, but still 2s-comlienment
Same was done (as for Emerson battery) for Delta & Huawei

 Emerson – support negative values

1. ZTE fix from version 1.14

2. Emerson alarms – fixed and checked for ACU+ and NCU

3. Delta alarms (snmp) added

                case 32851:     alarms->alarm_batt_fuse_MC    
                case 32972:     alarms->alarm_temperature_high
                case 32770:     alarms->alarm_batt_fuse_MC    

Delta Orion version below 7.6
ZTE for eth versions above 1.04

huawei solar data added (to snmp query, and to the generic modbus result mapping)

Huawei - Solar

Skipped

Emerson - under the alarms parsing:
                data->field_object.size--; //mask the last OID code.. its a running number
                TO:
                data->field_object.size--; //mask the last OID code.. its a running number
                As per the integration of Huawei, the last .X of the OID, which we are trying to mask is not always one byte...
Huawei alarms implemented (Textual compare)
snmp->protocol.working_community was added (Huawei does not support "public".. only "Public")

Huawei

Emerson - NCU alarms support. The bulk request payload has been changed - tested on both ACU+ and NCU and its working
eth_HUAWEI_SMU02C added

Huawei

eth_EMERSON_ACU_PLUS changed to eth_EMERSON_ANY

Cutthrough support (RCL)

Alarms updates after testing for Delta and Emerson ACU+

Skipped

Emerson ACU+ device added

delta internal temperature was missing factor of 10

status byte added to device broadcast

first functional version (ZTE support)

ZTE

Skipped

first version