Datakom
Supported Models
Datakom D500Communication Method
Modbus-TCP/ETH
This panel requires a dedicated Modbus TCP connection module is required.
Technical Specifications
Supported Services
Parameters | Alarm Name | Alarm Criticality | Remote Controlling |
---|---|---|---|
Engine_Hours | Genset Low Frequency |
|
|
Engine_Speed | Genset High Frequency |
|
|
Battery_Voltage | Genset Low RPM |
|
|
Frequency | Genset High RPM |
|
|
Working_Mode | Genset Low Voltage |
|
|
Coolant_Temperature | Genset High Voltage |
|
|
Oil_Pressure | Generator_low_oil_pressure |
|
|
Total_Output_KWH | Generator_high_oil_pressure |
|
|
Voltage_Phase_1-3 | Low Engine Temp |
|
|
Current_Phase_1-3 | High Engine Temp |
|
|
Power_Factor_1-3 | Low Fuel Level |
|
|
| High Fuel Level |
|
|
| Low Oil Temp |
|
|
| High Oil Temp |
|
|
| Low Canopy temp |
|
|
| High Canopy temp |
|
|
| Engine Temp. Snd Open |
|
|
| Fuel Level Snd Open |
|
|
| Oil Temp Snd Open |
|
|
| Canopy Temp Snd Open |
|
|
| Ambient Temp Snd Open |
|
|
| Low Battery Voltage |
|
|
| High Battery Voltage |
|
|
| Fail To Start |
|
|
| Fail To Stop |
|
|
| Low Charge Volt |
|
|
| J1939 ECU Error |
|
|
| High Air Inlet Temp |
|
|
| Low Coolant Level |
|
|
| Voltage Unbalance |
|
|
| Current Unbalance |
|
|
| Over Current |
|
|
| Over Load |
|
|
| Reverse Power |
|
|
| Gen Phase Order Fail |
|
|
| Mains Phase Order Fail |
|
|
| Gen CB Fail To Close |
|
|
| Gen CB Fail To Open |
|
|
| Mains CB Fail To Close |
|
|
| Mains CB Fail To Open |
|
|