How To Upgrade Elara IAP Version?

Owned by arkadi kaplon
Last updated: 15.10.23
2 min read

To ensure the proper operation of the Elara gateway, it is essential to perform the Elara IAP version update process according to the instructions in this document.

The purpose of this document is to demonstrate two methods for upgrading the Elara IAP version in the Power Center via serial (cable) connection and over-the-air (OTA) connection in the Galooli solution.

Serial Connection

Open the Power Center software

  1. Select the correct serial com# in the "Connect Via" section

  2. Select "Elara" from the "Active Device" section

  3. Make sure that the status is “serial”

  4. Click on the “Elara” tab

  5. Click on “Read Configuration” and wait until the process is complete

  6. Click on “Information”

  7. Click on the “Status” icon

  8. Click on the “Status” tab

  9. Make sure the "Version" raw represents the current IAP version of the Elara. If not, proceed to the next section

  10. Click on “Upgrade IAP Version”

  11. Ensure that you upgrade the unit to the appropriate version and click on "Download Version"

  12. Once the progress has been completed, close the Power Center and reopen it

 

OTA Connection

Open the Galooli solution>> Manager Application:

  1. Click on the "My Versions" tool

  2. Choose "Elara" from the "Device Type" menu

  3. Choose the relevant version in the “Available Versions” section (Ensure that the IAP version is selected)

  4. Choose the relevant unit\units

  5. Click “Upgrade” and wait until the process is complete

 

 

 

 

Â