Versions Compared

Version Old Version 25 New Version Current
Changes made by

arkadi kaplon

arkadi kaplon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The latest version of the Galooli solution incorporates features that reflect our open dialogue with our customers and Galooli's desire to facilitate and improve the system's use. The purpose of this article is to provide information about the main features of this version.

Table of Contents
minLevel1
maxLevel1
outlinefalse
stylenone
typelist
printabletrue

General Updates

Updated Articles

Panel
bgColor#F4F5F7

#Knowledge

New Hardware Support and Integration

Panel
bgColor#F4F5F7

#Hardware

Hardware Support and Integration

New Humidity Sensor Support

Panel
bgColor#F4F5F7

#Environment

Starting from the upcoming version, humidity sensor support will be introduced for Shelter 1-4. This enhancement will be reflected across various Galooli Solution applications, including:

  • Panorama Application Live View for real-time humidity data visualization.

  • Manager Application for configuration and KPI definition.

  • NOC Application

  • Mobile Application

image-20250105-122931.pngImage Added

Logout Mid-Session New Error Message

Panel
bgColor#F4F5F7

#Security

A new error message has been added to the system to notify the user when they are disconnected due to simultaneous connections from two stations/browsers using the same user account.

image-20241215-082245.pngImage Removed

Panorama Application

image-20241215-082245.pngImage Added

Panorama Application

Trends In Live View

Panel
bgColor#F4F5F7

#Data Analysis #Bottom Line #Energy

The new Panorama Live View feature, “Live View Trends,” provides real-time insights directly within the live view. This enables users to assess site performance without proactively running reports or dashboards. The feature highlights whether current production and consumption levels align with historical data patterns or deviate from them, helping to identify normal or abnormal behavior.

In this version, the Trends are relevant only to “Solar” data and “Consumers Load”.

Read More - https://galooli.atlassian.net/wiki/spaces/KP/pages/2891251716/Site+Status+Card#Site-Trends

image-20250105-105933.pngImage Added

X-Ray Tab

Panel
bgColor#F4F5F7

#Active Control #Bottom Line

Starting with this version, the Panorama Live mode revolutionizes how users interact with X-Ray data by presenting it in one clear, intuitive, and user-friendly location. The new X-Ray tab takes the user experience to the next level, offering powerful features that make insights clearer, more interactive, and immediately actionable.

A standout enhancement is the ability to effortlessly initiate manual X-Ray requests—bypassing the standard automatic mechanism—empowering users with greater flexibility and control like never before. Additionally, the tab dynamically highlights invalid settings directly within the site's live view, delivering real-time insights and actionable feedback that streamline decision-making and optimize operations.

Read More - https://galooli.atlassian.net/l/cp/kVrS5QJm

image-20241231-115101.pngImage Removed

image-20241231-115101.pngImage Added

New Grid Insights Dashboard

Panel
bgColor#F4F5F7

#Data Analysis #Bottom Line #Energy

Part of the Galooli Analyst dashboard, this new Grid Insights Dashboard is powered by fields added to the AI-based report, providing comprehensive analysis and monitoring of grid energy consumption and efficiency.

Key features:

  • Insights into Phase Balancing

    • Analyze load and voltage trends to identify and address imbalances across grid phases.

    • Prevent equipment damage and operational inefficiencies caused by imbalanced phases.

  • Peak Hour Usage Metrics

    • Compare grid energy consumption during peak and off-peak hours.

    • Detect inefficiencies and identify opportunities for cost optimization.

  • Corrective Action Recommendations

    • Leverage actionable insights to optimize grid performance.

    • Execute configuration adjustments using tools like the X-Ray tool.

This dashboard empowers users to enhance grid performance by offering actionable insights and tools for efficient energy management.

Read More - Unit Level Dashboard / Multi Unit Level Dashboard

image-20250106-084924.pngImage Added

Smart Battery Fields Precision

Panel
bgColor#F4F5F7

#Energy

The number of digits displayed after the decimal point has been changed to 2 for the following fields under Smart Batteries (1-20):

  • Min Cell V

  • Max Cell V

The change is reflected in Panorama Live Mode and the Mobile Application.

Mobile Application

X-Ray Story

Panel
bgColor#F4F5F7

#Active Control #Bottom Line

With the recent addition of the X-Ray tab viewing capability in the Panorama application, further enhancements have been introduced made to the X-Ray Story in Galooli's mobile application, providing . This update provides an improved and seamless experience for viewing the upgraded table .and utilizing the “Scan” capability,

Read More - https://galooli.atlassian.net/wiki/x/QoBDlg

image-20241231-115611.pngImage Removedimage-20241231-115611.pngImage Added

Pro Application

New Summary Fields & Updates

A new summary fields have been added to the Galooli reports system:

“Grid Outage Count” -
Panel
bgColor#F4F5F7

#Data Analysis

  • Grid Outage Count (Summary type - Energy Global)

This field will calculate the number of occurrences (relative to the report period and aggregation) where the “Site_Global.Alarm Galooli Grid Fail” field changed from 'No' to 'Yes'.

Read More - https://galooli.atlassian.net/wiki/x/BQCQqg

  • Rectifier Fields (Summary type - Rectifiers)

    • “Rectifier 1 - Solar Module X Output Power Max [kW]”

    • “Rectifier 1 - Solar Module X Output Power Avg [kW]”

    • “Rectifier 1 - Solar Module X V Max/Avg” renamed to "Rectifier 1 - Solar Module X Input Voltage Max/Avg"

    • “Rectifier 1 - Solar Module X I Max/Avg” - renamed to "Rectifier 1 - Solar Module X Output Current Max/Avg"

Read More - Rectifiers Fields

  • “Generator Generator X Ignition Count” Count - Update Logic:

    Add an ignition to the counter if

    (Summary type - Working Generators)

The ignition counter will increase whenever there is a change in the status of "Site Global Generator X Running

was

" from false in the previous record

, and

to true in the current record

(state changed from false to true)Ignore

. However, any records where "Site Global Generator X Running" is false

AND

and "Generator X Disconnected" is true will be ignored when performing this calculation.

  • Grid Tariff Time Periods (New group)

    • Battery Charge Time by Grid - Peak Hours

    • Battery Charge Time by Grid - Off Peak Hours

    • Battery Charge Time by Grid - Shoulder Hours

Read More - Grid Tariff Time Periods

  • Battery X Alarms (Smart Battery group - Logic update)

    • Battery X Critical Alarms

    • Battery X Urgent Alarms

    • Battery X Non-Urgent Alarms

    • Battery X Indication

These fields now return the count of unique alarms triggered for the battery during the report period. The calculation is performed per 24 hours, meaning that for reports spanning more than 24 hours, the same alarm will be counted once for each day it was triggered (e.g., if it was active on multiple separate days).

To clarify:

  • If the same alarm is triggered twice for battery X within the same 24-hour period, it will be counted as one alarm.

  • Previously, these fields returned a binary flag (Yes/No) indicating whether the battery experienced an alarm of type Indication, Non-Urgent, Urgent, or Critical during the report period.

Read More - https://galooli.atlassian.net/wiki/x/eoDWng

New AI Fields & Updates

Panel
bgColor#F4F5F7

#Data Analysis #Bottom Lines

  • AI Based Analysis Grid (AI Based)

    • Unstable Grid - Active/Description/Activation Date

    • Imbalanced Grid Phases - Active/Description/Activation Date

    • Grid Peak Hours Inefficient Usage - Active/Description/Activation Date

Read More - https://galooli.atlassian.net/wiki/x/CABV0Q

Fuel Tank 1-2 Fields Changes

Panel
bgColor#F4F5F7

#Calibrations

Updates and additions to the Fuel fields:

Changes to existing fields:

  1. “Main Fuel Tank Capacity” renamed to “Fuel Tank 1 Capacity”

  2. “Main Fuel Tank Minimum Level” renamed to “Fuel Tank 1 Minimum Level”

  3. “Main Fuel Calibration” renamed to “Fuel Tank 1 Calibration Name”

  4. “Main Fuel Tank Capacity N” renamed to “Fuel Tank 1 Capacity N”

  5. “Main Fuel Tank Minimum Level N” renamed to “Fuel Tank 1 Minimum Level N”

Calculation logic for the above fields:
a. If infoBeadFleetBasic exists: Fleet Basic Fuel Main (infoBeadFleetBasic.eAnalogInfo.Fuel_Main).
b. Otherwise: Site Global Fuel 1.

New fields added, based on Site Global Fuel 2:

  1. Fuel Tank 2 Capacity

  2. Fuel Tank 2 Minimum Level

  3. Fuel Tank 2 Capacity N

  4. Fuel Tank 2 Minimum Level N

  5. Fuel Tank 2 Calibration Name

The new fields represent the values derived from a calibration table linked to the IO that connected to the unit.

Lithium Ion Battery Field Name Updates

Changes to Lithium Ion Batteries (LIB) fields names across the Galooli system (My X-Ray | Pro | My Units)

  • The field “Module #X” has been renamed to “Module Version”.

  • The field “SerialNumber” has been renamed to “Serial Number”.

  • The “LIB” prefix has been removed from the field names displayed in the X-Ray table.

Galooli Automations - Control Commands Permissions

Panel
bgColor#F4F5F7

#Active Control #Security

A new permissions verification mechanism has been implemented for the Automations tool.
If an automation is triggered by a user lacking the Control Commands permission and includes a command from the designated command list, the automation will fail execution.

During a script Verify process, the code will "break," and an error message will be displayed to the user.

Read More - https://galooli.atlassian.net/l/cp/11TasXKx

image-20241203-074254.png
image-20241203-074211.pngimage-20241203-074230.png

“Status” Field Changes

We have removed several options from the filtering details of the field “Status”:

  • Alert

  • Unknown

  • Upgrade Process

image-20241209-091940.pngImage Removed

Fuel Tank 1-2 Fields Changes

Updates and additions to the Fuel fields:

Changes to existing fields:

  1. “Main Fuel Tank Capacity” renamed to “Fuel Tank 1 Capacity”

  2. “Main Fuel Tank Minimum Level” renamed to “Fuel Tank 1 Minimum Level”

  3. “Main Fuel Calibration” renamed to “Fuel Tank 1 Calibration Name”

Calculation logic for the above fields:
a. If infoBeadFleetBasic exists: Fleet Basic Fuel Main (infoBeadFleetBasic.eAnalogInfo.Fuel_Main).
b. Otherwise: Site Global Fuel 1.

New fields added, based on Site Global Fuel 2:

  1. Fuel Tank 2 Capacity

  2. Fuel Tank 2 Minimum Level

  3. Fuel Tank 2 Calibration Name

NOC Application

Shelter Alarms Changes

NOC image-20241209-091940.pngImage Added

NOC Application

Shelter Alarms Changes

Panel
bgColor#F4F5F7

#Environment

NOC environment alarms have undergone several changes, including:

  1. Updated Alarm Names: Renamed alarms to improve clarity and alignment with the system's terminology.

  2. Individual Shelter Alarms: Introduced distinct alarms for each shelter (Shelters 1, 2, 3, and 4) for better specificity and monitoring.

Read More - https://galooli.atlassian.net/wiki/spaces/KP/pages/2605350930/NOC+Alarms+List#Environment-Alarms

Manager Application

New

Humidity Sensor

Support

Configuration

Panel
bgColor#F4F5F7

#Environment #Configuration

Starting from the upcoming version, we will offer support for a humidity sensor (for Shelter 1-4).

Configuration:

  • The sensor configuration can be done in the configuration tab within the unit editing window (My Units).

  • The humidity sensor will appear in the expansion tab for Shelter 1-4 after the unit's next transmission.

image-20241219-094834.png

Thresholds:

A threshold for a humidity alarm (Non-Urgent level) can be configured under KPI → Environment Section in the unit editing window.

image-20241219-094953.png

Additionally, a corresponding field has been added to the Organizational KPI, with a default value of 80%.

The Galooli Humidity High Alarm will be triggered if:

  • Humidity Configured = True

  • Humidity > KPI

  • KPI ≠ 0 (not zero).

Audit Trail - OTA Logs

The logs of over

Panel
bgColor#F4F5F7

#Active Control #Security

Over-the-air (OTA) actions action logs are now documented and displayed visible in the Audit tool. The feature is already , available in the Galooli Solution.

Additionally, logs have been added to the Audit system for actions performed by users through various Unit Command menus in both Panorama and Mobile App.

Read More - Audit

image-20250105-121506.pngImage Added

IOs Invert State & Panic Display

The checkboxes “Invert State” and “Panic” will only be displayed to the user when the IO is of type Digital and configured as an Input (Digital 1–50). In all other cases, these checkboxes will not be shown.

Read More - https://galooli.atlassian.net/wiki/spaces/KP/pages/2830401910/IO+s#IO%E2%80%99s-Creation

image-20241225-060853.pngImage Removed

X-Ray KPIs & My X-Ray Filter Default State

The default filtering configuration for the X-Ray tables and the X-Ray KPIs component under the Unit Configuration in My Units has been updated. The new default will display only rows with values. This filter can be toggled on and off using the following button.

Read More - https://galooli.atlassian.net/wiki/spaces/KP/pages/3094183938/X-Ray+KPIs#X-Ray-Parameters / https://galooli.atlassian.net/wiki/spaces/KP/pages/2915762177/My+X-Ray#X-Ray-Table-Configuration-Section

X-Ray KPIs

My X-Ray

image-20241209-094444.pngimage-20241209-094405.png

Sub-Menu Name Change

The sub-menu/tab previously named "Installation Setups" under the Configuration Menu has been renamed to "Setups."

image-20241215-094237.pngImage Removed

Following this change, the configuration process for Video Streamers supported by Galooli will now be carried out here.

Read More - https://galooli.atlassian.net/l/cp/ia0MJPEp

image-20250105-121902.pngImage Added

My Calibrations - Improve Descriptions

  • Display Adjustments:

    • For calibration types: “Box”, “Cylinder horizontal”, “Capsule horizontal”, “Cylinder vertical”, and “Capsule vertical”

      • Empty has been renamed to Empty-N.

      • Full has been renamed to Full-N.

      • For the fields W/L/H/R, the unit [m] has been added next to each field (e.g., R [m]).

    • For calibration type Table:

      • Source has been renamed to Source-N.

  • Max Value Calculation for All Calibration Types:

    • The Max Value will now be calculated only after saving the calibration (both when creating or editing a calibration).

    • A notification will be displayed to the user: "Save to show max."

My Calibrations - Removed Calibration Types

Two calibration types have been removed from the Calibration Type menu in My Calibrations within the Manager application:

  1. Thermistor_NTC

  2. Polynomial Calibration

image-20241215-082856.png

Shelters Support

We have removed support for configuring more than four Shelters per unit.