Versions Compared

Old Version 16

changes.mady.by.user arkadi kaplon

Saved on

compared with

New Version Current

changes.mady.by.user arkadi kaplon

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

My Units management and configuration solution provides a tool for managing and editing the organizational tree. The solution provides flexibility and convenience when it comes to configuring Galooli gateways within your organization.

...

Cluster is the second-highest level of the organization hierarchy. The cluster is a branch under the organization and each organization can contain one or more clusters. Clusters contain groups and units. Learn more.

Group

The group is the third-highest level of the organization hierarchy. Groups are lower than the cluster, each group can have one or more units. Learn more.

Unit

The unit is the building block of the Galooli solution and acts as the logical identity representing the asset in the system. The unit is the lowest level of the unit hierarchy and does not have any levels beneath it.Learn more.

...

Commands

There are several command commands buttons in the system, and their use varies according to the user's position within the organization tree.

...

Organizational Information

In the organizational information section, you can set and verify KPIs for all of your new assets, making it easier to add units and ensure that all asset settings conform to your expectations. The tool is intended for units that share the same parameters.

  • These are default values for the KPIs of the units - new units will be assigned these values as a default.

  • By editing these parameters, you do not affect the values of existing units, but you do affect the values of new units added to the organization.

It is possible for the user with the appropriate permissions to edit the thresholds.

https://galooli.atlassian.net/wiki/spaces/KP/pages/2584182813/Permission+Management#Galooli-Manager-Permission

...

Category

Section

Explanation

Load Shedding

Stage

  • National Stage - An indication of the load shedding stage at the national level.

  • Cape Town Stage -  An indication of the load shedding stage at Cape Town.

KPI


Environment

  • Shelter X High Temperature Threshold

  • Shelter X Very High Temperature Threshold


Fuel

  • Cost Per Liter/Gallon

  • Liter/Hour

  • Liter/100Km

  • Level Low Threshold

  • Level Very Low Threshold

Generators

  • Output High Voltage Threshold

  • Output Minimal Voltage Threshold

  • Battery Low Voltage

  • Battery High Voltage

  • Cycle Hours For Periodic Maintenance

  • Hours Per Day KPI

  • Periodic Maintenance Visit Cost

  • High Frequency Threshold

  • Low Frequency Threshold

  • Low Oil Pressure Threshold

  • High Coolant Temp Threshold

  • Short Circuit Current Threshold

  • Over Current Threshold


Global DC

  • Voltage Threshold LVD

  • Voltage Threshold LVD Release

  • Voltage Threshold BLV

  • Voltage Threshold BLV Release

  • Voltage Threshold PLD

  • Voltage Threshold PLD Release

  • Voltage Threshold Generator Fail To Start

  • High System Voltage Threshold

  • High Battery Current Threshold

Grid

  • High Voltage Threshold

  • Minimal Voltage Threshold

  • Cost Per KWh

  • High Current Threshold

Vehicles

  • Minutes To Idle

Sustainability

  • Grid Emission Factor [kgCO2e/kWh]

  • KgCO2e Per Day KPI


Consumers

  • Consumers Load Drop Current Threshold - The current threshold value for site down alarm.

  • High Consumers Power Threshold

KPIs Breakdown

Using the KPI breakdown, you can find out how many units of the organization meet the relevant parameter thresholds.

As shown in the pie display of KPI breakdown, the green slice represents the amount of units that are corresponding to the organization's default value.

All you need to do is select the relevant parameter, click "KPI Breakdown," and the data will appear. The example below shows that 34 units out of all the organization units fall within the desired range for the selected parameter.

...

Copy Settings

Through the KPI level “Copy Settings” tool, the organizational information parameters mentioned above can be copied and override other units KPI parameters within the organization. As with unit level "Copy Setting", the tool behaves similarly, but only refers to the parameters of that particular tool.

...

Child pages (Children Display)

...