| Table of Contents |
|---|
...
Permission Name | Permission Purpose | Platforms where changes are reflected |
|---|---|---|
Tenants | The name of the tenants that the user can see information about them on the various Galooli platforms. Separate the names of the tenants by a comma (“,”) without any spaces between the comma and the tenant's names  If the user is expected to see all tenants, the word "Any" should be used. | Colocation NOC Power Consumption Pro Reports CPH Report |
Subsidiary IDs | Internal Galooli ID's for accounting purposes | Admin |
| In the event that the default 30 seconds query interval of the SDK needs to be changed, please contact Galooli support. Only Admin permissions user can see and change the SDK query Interval. |
|
| The main purpose of the SDK Allowed IPs tool is to permit users within the organization to utilize the SDK solution via specific IP addresses. It is not mandatory to set an IP address, but it is highly recommended. In the absence of a dedicated IP address, you may use the SDK tool's IP address from all IP address. The use of the SDK solution is possible for users at the “Manager” or “Administrator” authorization level Add/Edit IP Address Click on the “pencil” icon 
 
It is advisable to allocate an external static IP address and not a dynamic external IP address, as a dynamic address will change once your router has reset or due to any maintenance operations on your ISP side - for additional information, please contact your local ISP company |
SDK tool at the Pro solution |
Make sure that the IP address that you have entered corresponds to the same External IP address of your service/server - you can do this by googling “What is my IP address”...