Required Equipment & Software's

• Power source for the Ultragate- TBA

• Power cables for the Ultragate - two cables with a thickness of 0.5mm. The length of the cables is determined by the distance between the power supply and the Ultragate.

• Green terminal blocks for the power connection.

• If a Galooli cabinet tray/box set is being used in the installation, ensure that a DC to DC converter suitable for Ultragate is installed.https://galooli.atlassian.net/wiki/spaces/KP/pages/2470281237/Power+Converters#DC-DC-Converter-(DDR-60)

• Power source for the Galooli gateway Metal Box/Tray - 18-75v DC

• Computer with internet connection.

• Activated SIM card of a standard type

• Screwdriver (Slotted & Phillips)

Hardware Installation

TBA

Internal Battery Installation

If the internal battery of the Ultragate is not connected to the gateway, follow the instructions below to assemble it.

Step 1: Take off all the terminals.

Step 2: Screw off all the screws (exclude the DIN Rail).

Step 3: Open the casing, crew off the 4 screws on the board.

Step 4: Disclose the 1st layer board, you will find the place showed below, which you could install the battery on it.

Configuration