Version 02.02.34

The latest version update of the Galooli Gateways includes features that reflect an open dialogue with our customers and Galooli’s desire to facilitate and improve hardware usage. This article contains information about the main features.

Elara Extended Report Retries
By default, the Elara gateway transmits a message and repeats it up to five times if the server does not confirm that the message has been received correctly. In some geographical locations, this can be due to network behavior or other network failures. After 5 attempts the message will be erased and Elara gateway will continue to the next message.
When such circumstances arise, it is possible for Elara to continue to send a message up to 250 times before deleting it.
The option must be set in the Power Center to increase the number of attempts to 250.
It is not recommended to use this parameter. When there is a known problem with the SIM's reception, data usage may increase significantly.
Elara IPV6 Support
If Elara must receive an IP address under IPV6 rather than IPV4. It is necessary to mark the new parameter.
There is no need to use it unless there is a special requirement.
Global output timeout
With the Output Global Timeout parameter, you can specify how long the device will wait after the output activation command has been triggered before it deactivates the output. The timeout can be used to specify the duration of the relay activation and can be set to a variety of values.
As an example:
When the relay is used to control a motor, the output timeout can be set to keep the motor running for a certain period of time before turning it off.