Version 02.02.40

Owned by arkadi kaplon
Last updated: 19.12.23
2 min read

The latest version of the Elara Gateway includes features that reflect an open dialogue with our customers and Galooli’s desire to facilitate and improve hardware usage. This article contains information about the main features.

  • ELARA CAN Bus Communication Support
    The Elara gateway now supports CAN Bus communication (J1939 protocol) which allows a direct connection to the generator engine without the need for a generator control panel.

    For these capabilities to be achieved, it is necessary to:

    • Use specific Elara hardware - https://galooli.atlassian.net/l/cp/1WA7WePt

    • Make sure the Elara version is at least 02.02.40.

    • The device should be added via Power Center

 

  • Elara Global Configuration Updates

    • Due to a lack of usage, the "Port Route" was removed.

    • The "checkboxes" section has been moved to a more appropriate location.

Full Document - Power Center Elara Global Configuration

 

  • CAN Silent Mode
    In this mode, Elara CAN prevents data from being sent to the engine control unit, whether it is a direct connection to the engine or a connection to the generator panel.

    This mode can therefore be activated if the user wishes to have the unit only "listen" to the communication line.

    As this mode may affect the connectivity between the CAN and the unit, it is not Galooli default.

    Full Document - Power Center Elara Global Configuration

     

  • GPS – HDOP & Altitude added

  • DATAKOM – Alarms integration

  • BIT improvements to detect SD corruption at the factory