Skip to end of banner
Go to start of banner

CBEIL PTZ Network Camera

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

Network camera uses smart IR technology, and intelligent image analysis techniques.

image-20241201-113855.png

Manufacturer's website - http://www.cbeil.com/Content/462208.html

Model

Manufacturer PN.

Galooli PN.

CBEIL  PTZ

QM4

400-PTZcamera-QM4

Manufacturer Technical Specification and Datasheet

Installation and Manufacturer Internal Configuration

  1. Connect the camera to a 12V power source using one of the following options:

Power Adapter (included with the camera)

image-20241203-082809.png

Input Power Source Connection

image-20241203-083025.png

  1. Connect the communication (Ethernet) cable between the camera and your computer.

    image-20241203-083459.png

  2. Open any internet browser and enter the unique IP address provided in the camera's documentation. Then, enter the username and password included in the camera's documentation and click “Login”

If all parameters are entered accurately, the camera's default parameters will be displayed. If you wish to modify any parameters, ensure you save the changes at the end. However, no changes are required on Galooli's side.

Login Process

image-20241203-083809.png

Camera Default Parameters

image-20241203-084441.png

  1. Proceed to the next section to complete the configuration in the Galooli Solution.

Galooli Configuration

Open the Galooli Solution >> Manager Applications >> My units >> Choose the relevant site >> Configuration tab >> Installation Setups >> Video Streamer >> Enter the following address according to the details of the relevant camera:

device:{name};user:{username};password:{password};ip:{device-ip}

The camera name, username, password, and IP address should be updated according to the information provided with the camera.

Save the changes.

To view the video stream, please refer to the following document and follow the provided instructions. https://galooli.atlassian.net/wiki/x/AgAP1

  • No labels