Lesson Highlights

Name of the lesson

Stationary Assets Installation & Configuration Flow

Purpose of the lesson

The objective of this lesson is to provide the user with a detailed description of the installation and configuration processes that must be followed in order to maximize the potential of Galooli stationary gateways and Galooli software.

Target Audience

End-users of the system such as technicians, service providers, back-office, organization managers, etc.

Installation Form

TBA

Checkout Form

TBA

Technician

• Finish complete installation as per technical booklet

• Configure all devices in Power Center platform

• Fuel accuracy test done (if relevant)

• Installation and QA report completed and submitted

Backoffice

• Installation and QA report review

• Configuration checks

• Alarm test

• Jotform checkout report completed

Configurations Process

The configuration process of a new gateway in an organization is a crucial step in receiving proper data from the gateway and obtaining the maximum amount of accurate data from the Galooli solution.

There are several steps involved in the configuration process. Some are the same for all gateways, while others are specific to each gateway. Follow the instructions carefully in order to avoid missing important details.

Power Center Basic Configuration

Step 1 - Connection to Power Center

To perform configuration through the Power Center platform, it is necessary to connect to the gateway. Depending on the type of gateway, the connection can be physical (Serial) or over the air (OTA). Please refer to the following link for details regarding each Gateway connection method - Stationary Asset Gateways

Step 2 - Basic Configuration

TBA

Galooli Solution Basic Configuration

Organization Tree

Open the Galooli Solution >> Click on the “Manager” application >> Click on “My Units” >> It is recommended that you create meaningful clusters and groups in your organization tree that will assist you in managing all future gateways. My Units

Unit Configuration

Open the Galooli Solution >> Click on the “Manager” application >> Click on “My Units” >> Locate the relevant gateway within the "Stock" cluster and click on it.

In the event that you own an active gateway in your organization, you can copy all or part of the configurations to the new gateway using the following ways:

Step 1 - Copy Settings

• Copy settings from the organizational KPI settings - https://galooli.atlassian.net/wiki/spaces/KP/pages/2802450433/My+Units#Copy-Settings. It is important to note that this new gateway will automatically receive the relevant configurations if your organization has an organizational KPI configured.

• Copy Settings from the unit level settings- Copy Settings

• Clone Unit - https://galooli.atlassian.net/wiki/spaces/KP/pages/2830401537/My+Unit#Clone-Unit

If this is the organization's first gateway, please follow the steps below.

Step 2 - Manual Configuration

• Locate the relevant unit within the "Stock" cluster and click on it. My Unit
  

• The "Overview" tab should be field according to the organization preferences:

  • The ID should be provided by the Galooli support team.

  • Set the gateway a meaningful Name.

  • Set the gateway Activation Date. As a general rule, the activation date will be the date when the unit was created, but if the unit was created before today in the Stock cluster, you may need to adjust the activation date accordingly.

  • Set the “Asset Type”. Asset types should correspond to the types of units that the gateway connects to.

  • Set the "Stationary Unit" to "Yes".

  • Set the destination Email and SMS for future notifications. Email and phone numbers can be set at the cluster or group level as opposed to the unit level.

  • The remainder of the information can be filled in as needed. https://galooli.atlassian.net/l/cp/GUAkk1K4
    

• On the "Configuration" tab >> Click on the “IO’s” submenu >> Add inputs and outputs, followed by calibration tables. On the basis of the IO’s settings, it will be possible to define events in the system later on. https://galooli.atlassian.net/l/cp/sfiBfhtN
  

• On the “Configuration” tab >> Choose the “Device Configuration” submenu >> Choose the layout code appropriate to the type of the site. In the same place make any necessary display configurations. https://galooli.atlassian.net/l/cp/qJHywnNj
  

• On the "Configuration” tab >> Select the “Maintenance", set the relevant maintenance dates.
  Maintenance
  

• On the "Configuration" tab >> Choose “KPI” submenu, set all the relevant fields and thresholds that affect dashboards and reports in terms of alerts and calculations. KPI
  

• On the "Events" tab, add the relevant events.https://galooli.atlassian.net/l/cp/zjX0vNmg
  

• On the "Information" tab >> Choose the “Unit” submenu >> Select the “Hardware” section >> Enter the "SIM Phone Number" and "SIM Serial Number". https://galooli.atlassian.net/wiki/spaces/KP/pages/2830041108/Information#Unit
  

• On the "Information" tab >> Choose the “Additional Information” submenu >> It is important to add additional information about the unit in order to display relevant information. https://galooli.atlassian.net/wiki/spaces/KP/pages/2830041108/Information#Additional-Information
  

• Click on “Save”
  

• Transfer the unit from the "Stock" cluster to another relevant cluster. https://galooli.atlassian.net/l/cp/J6c4DHE1
  

• Verify that the unit can be seen on the Panorama map and that the Panorama time stamp is being updated.https://galooli.atlassian.net/l/cp/hth1o23t