Active Alarms Notification

Be notified automatically when a unit has an active for longer than 10 (or more) minutes.

Important Remarks

Schedule this script to run every 5-15 minutes. The scheduling will affect how much time the alarm should be active before the user is notified.
In the “Alarm State” variable, paste the unique identifier of the alarm you are interested in.
In the “Send Email” function, replace the email address to which the message will be sent.
The attached file must be downloaded to your computer and loaded into the Galooli automation solution once the data has been edited.

Unit Disconnection Notification

Be notified by email when units are disconnected for a long period of time.

Important Remarks

Schedule this script to run every half hour
In the “Send Email” function, replace the email address to which the message will be sent
Due to the fact that the test is performed every half hour, and the test in the code examines whether the unit has been disconnected for more than five hours, the notification of the disconnection can arrive (at the latest) five and a half hours after the actual disconnection took place
The attached file must be downloaded to your computer and loaded into the Galooli automation solution once the data has been edited

Determine which people should be notified based on severity or number of notifications.

Important Remarks
TBA

When the battery SOC (state of charge) is over 90% (or other threshold), turn off the generator to prevent redundant running time.

Important Remarks
TBA

When the battery SOC (state of charge) is below 40% (or other threshold) start the generator to prevent loss of backup or downtime

Important Remarks
TBA