Skip to end of banner
Go to start of banner

Battery Cell Monitoring - Power Connection

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

  1. Connect the Battery Cell Monitoring HUB to a +12V DC or 48V DC power source. It is recommended to connect it to the Elara tray if it is used.

2. The LED green light should be on - indicating a successful power connection.

3. Connect the Elara gateway to a +12V DC or 48V DC power source
Power & Connectivity (Direct to the Elara)

Power & Connectivity (Cabinet Tray/Box)

  • No labels