Skip to end of banner
Go to start of banner

Battery Cell Monitoring - Connection to the Computer and Configuration

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

  1. Connect the Battery Cell Monitoring HUB to the computer via the RS485 connection.

To perform the initial identification and connection of the Battery Monitoring components to the computer, follow these steps:


1. Download the Battery Monitoring Software (PBMS2000 Monitoring Software)

2. Ensure that the Battery Cell Monitoring HUB is powered on

3. Open the “PBMS2000 Monitoring Software”

4.

קונפיגורציה עם ובלי רקטיפייר

  • No labels