K3
- arkadi kaplon
The K3 gateway is an innovative plug & play solution. With its small size and simple connectivity to the On-Board Diagnostic (OBD) port in the vehicle, it can extract large amounts of data, including location tracking, fuel level, and engine diagnostics.
Features
Plug & Play – NO Installation
Light & Small
Simple Integration with the OBD system
Fastest Acquisition time
Capture Original Vehicle Data
Driver Behavior Monitoring
Speeding Alerts
Bluetooth Option Available
Hardware Specifications
Manufacturer PN. | Galooli PN. | Manufacturer's website |
|---|---|---|
G797B-2G | 100-TrK32G-020 | |
G797B-3G | 100-TrK33G-020 | |
G797B-LTE/A | 100-TrK34G-020 |
Hardware Specifications
Technical Specification | Parameters | |
|---|---|---|
  General | Communication Modes | GPRS, HSPA, LTE, and TCP/UDP/SMS |
Location Technology | 56 Channels GPS | |
Operating Voltage | 12 & 24volt vehicle systems | |
    Electrical | Operating Voltage | 8-32V DC operational for 12V & 24V |
Power Consumption | 3mA 12V (Sleeping mode) | |
Backup Battery | LI-PO 250mAh | |
    GPS | Location Technology | All in One Ublox 7 GPS Chip |
Accuracy | SBAS 2.0m CEP | |
Tracking Sensitivity | -162dBm | |
Antenna | Patch internal | |
Assist GPS | Supported | |
  Cellular | Modem | HL 6528 or HL8548 HL75XX |
Data Support | SMS, TCP, UDP | |
GSM/GPRS | 850/900/1800/1900 | |
SIM Card | 1.8/3.3 V | |
SIM Card Data Usage | The SIM card data usage may change depending on its use. As an example, a car that operates 24 hours a day will consume a greater amount of data. | |
 Physical | Dimensions | 52(L) x 57(W) x 28 (H)mm |
Weight | 80g (Without Battery) | |
   Environmental | Operating Temperature | -40 ~ +80°C (without Backup Battery) |
Humidity | 95%RH @ 50°C non-condensing | |
Shock & Vibration | U.S. Military Standards 202G and 810F, SAE | |
EMC/EMI | SAE J1113; FCC–Part 15B | |
    Connectors, SIM Card Access | Connector Type | J1962 |
Mini USB | 1 Mini USB (configuration/debug) | |
Power Switch | Device Power ON/Off Switch | |
GPS Antenna | Internal | |
GSM Antenna | Internal | |
SIM Card | Internal or Embedded SIM option | |
 Indication LEDs
The device contains 3 LED indicators as well as sound indicators
Power LED: Red
Using an external power supply | Flash once quickly every 3 seconds |
Using a backup battery | Flash twice quickly in a row every 3 seconds |
Back battery low voltage | Flash three times quickly in a row every 3 seconds |
GSM LED: Green
Server socket connected | Flash once quickly every 3 seconds |
GSM network registered | Flash twice quickly in a row every 3 seconds |
GSM network unregistered | Flash three times quickly in a row every 3 seconds |
SIM card error | Flash four times quickly in a row every 3 seconds |
Serial link communication error | Flash five times quickly in a row every 3 seconds |
GSM module off | Never flash |
GPS LED: Yellow
GPS fixed | Flash once every 3 seconds |
GPS unfixed | Flash twice quickly in a row every 3 seconds |
GPS communication error | Flash three times quickly in a row every 3 seconds |
GSM module off | Never Flash |
Installation
Locate the OBDII port in the vehicle and plug in the device. Normally the port will be located to the left or below the steering wheel. But the location may vary depending on the type of vehicle.
During installation, the vehicle should be off
In case you are using a splitter, the following steps should be taken:
Attach the K3 unit to one side of the splitter
Fixate the K3 unit to a select location in the vehicle behind the dashboard. Ensure the unit is not capable of movement or vibration
Locate the OBD in the vehicle and remove the plastic covering
Pull out the vehicle’s original OBD harness from its base in the vehicle
Connect the original harness to one side of the splitter
Connect the splitter to the vehicle base
Return the plastic covering
Download the configuration tool ( )
To ensure proper reading and driver behavior information, please ensure the unit is with the GPS antenna side up (the side with the sticker). The unit should be fixated to the OBD connection and not move.
Configuration
The K3 units will be configured by the Galooli support team as a default configuration without the option to use the different diagnostics listed below. This is due to the fact that when the diagnostics option is activated and data is gathered from the vehicle, it can cause some malfunctions in the internal alert system of the vehicle. Therefore, the K3 can only be used for track and trace purposes.
The user is solely responsible for the consequences of activating a different diagnostic option.
Supported Diagnostics Parameters
On/Off status with K3 is determined by the increase in battery voltage and RPM activity.
As all information is received from the engine computer, many parameters will be available only when the vehicle is On.
Engine Diagnostics Available Parameters
PID | Parameter | IO Type | IO | |
|---|---|---|---|---|
| 1 | Â | Check Engine | Digital [0/1] | FleetDiagnostics.check engine |
| 2 | 0101 | DTC_Count | Analog [Count] | FleetDiagnostics.DTC_Count |
| 3 | 010C | RPM | Analog [RPM] | FleetDiagnostics.RPM |
| 4 | 0105 | Coolant Temperature | Analog [Celsius] | FleetDiagnostics.TempuratureCoolant |
| 5 | 015C | Oil Temperature | Analog [Celsius] | FleetDiagnostics.TempuratureOil |
| 6 | Â | Oil Pressure | Analog [Kpa] | FleetDiagnostics.PressureOil |
| 7 | 010F | Air Intake Temperature | Analog [Celsius] | FleetDiagnostics.TempuratureIntakeAir |
| 8 | 0146 | Air Ambient Temperature | Analog [Celsius] | FleetDiagnostics.TempuratureAmbientAir |
| 9 | 012F | Fuel Level | Analog [Liters] | FleetBasic.Fuel_Main |
| 10 | 010A | Fuel Pressure | Analog [kPa] | FleetDiagnostics.FuelPressure |
| 11 | 015E | Fuel Rate | Analog [km/Liter] | FleetDiagnostics.FuelRate |
| 12 | 0110 | MAF | Analog [kg/s] | FleetDiagnostics.MAF |
| 13 | 0111 | Throttle Position | Analog [%] | FleetDiagnostics.ThrottlePosition |
| 14 | 0104 | Engine Load | Analog [%] | FleetDiagnostics.EngineLoad |
| 15 | 0121 | Distance with MIL | Analog [km] | FleetDiagnostics.DistanceWithMIL |
| 16 | 015B | Hybrid Battery - Remaining Life | Analog [%] | FleetDiagnostics.HybridBatteryRemainingLife |
| 17 | 0902 | Fuel System - Open Loop | Digital | FleetDiagnostics.FuelSystem_OpenLoop |
| 18 | 0902 | Fuel System - Close Loop | Digital | FleetDiagnostics.FuelSystem_ClosedLoop |
| 19 | 0133 | Barometric Pressure | Analog [kPa] | FleetDiagnostics.PressureBarometric |
| 20 | 0187 | Monifold Pressure Intake | Analog [kPa] | FleetDiagnostics.PressureIntakeMonifold |
Driver Behavior Available Parameters
Parameter | Galooli Solution |
Harsh Acceleration | FleetBehavior.Harsh_acceleration |
Harsh Brake | FleetBehavior.Harsh_brake |
Harsh Turn | FleetBehavior.Harsh_turn |
Collision | FleetBehavior.Collision |
Towing | FleetBasic.Towing |