Installation Preparation
Before you get started make sure you have the following:
Project’s Wiring diagram - Provided by Galooli Support
CE Transducer CE42 Meter
The power source of +12V DC to power the Galooli RTU (Elara)
Electrical wires
Electronic tools – screwdriver, Multimeter, & f-crimp tool
Additional information:
The device is designed to be installed on a din rail
Make sure that you have sufficient space for its mounting
We recommend mounting the AC meter next to phase breakers - this act can simplify the process of disconnecting the cables from the breakers, passing the load cables through the meter, and then connecting them back to the breakers
Configuration Preparation
PC or laptop computer
Power Center installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
ZonMax installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
RS485 to USB converter - Refer here for driver installation instructions.
Project’s Wiring diagram - Provided by Galooli Support.
Note! Make sure your computer recognizes the COM port at the “Device manager”. Otherwise, install the proper driver.