This tab is read-only. Edit your units using the "My Units" menu.
An event is one of the key components of the ZON MAX solution. Events are occurrences detected by the server and can trigger alerts, or other actions notifying the user the event occurred. Events can range from fuel drops to speeding, to location warnings.
Events are set up in the Events tab in the User unit configuration.
Based on the IOs set in the system, events can either be digital or analog. Digital events either occur or do not occur, therefore the event will be triggered only upon the occurrence of the event.
Analog events require a certain threshold setting. Meaning the occurrence of the event relies on the value attached to it. For example speeding event is triggered only when the vehicle speed reaches a pre-defined threshold which can be defined by the user.
In order to create an event click on the “Click to add” button in the relevant event:
...
Each event contains several sections:
...
Event Name – The name of the event as it will appear in the display, reports, and dashboards
Delivery Method – Indicates if the event will be sent to the user’s email, SMS, or appear as a pop-up alert in the system
...
Creating Events
To create an event, select use the event category and click "Click to add". This will open the event creation window. Events can be pre-configured (such as speeding), the event creation will then contain all parameters required for a speeding event. By selecting from digital or analog events, creation is not pre-configured and the parameters need to be set by the user."My Units" menu.
Analog Events
...
Type – Choose between Value Exceeds/ Value Below. As analog events are value-based, such events should be triggered when reaching a certain value. The type determines if the trigger should be based on a value higher or lower than the determined threshold.
...
Type – Choose between On State/ Off State. As digital are is based on 2 states on and off, such events should be triggered only when the states switch from on to off or from off to on.
...
Input – Indicate the PIN of the event in the unit.
| Child pages (Children Display) |
|---|