...
External AC to DC Power Supply for the Ultragate - 12V/2A (Included in the package)
The accessory must be prepared in advance. Please refer to the following document for instructions: https://galooli.atlassian.net/wiki/spaces/KP/pages/3496607756/External+AC+to+DC+Power+Supply#Preparation-%26-Connection-to-Galooli-Gateway
Green terminal blocks for the different connections
Galooli cabinet tray/box set (Optional but advised)
Power source for the Ultragate Tray/Metal Box - 18-75v DC (In the case of a metal box/tray usage)
Computer with internet connection
Activated SIM card of a standard type or LAN internet connection
Two RJ45 (Ethernet) cables for the router and the computer. The length of the cables is determined by the distance between the Ultragate devices.
Keyboard + Mouse with usb connection
Computer screen
HDMI cable. The length of the cable is determined by the distance between the Ultragate and the computer screen
GSM Antenna
GPS Antenna
Screwdriver (Slotted & Phillips)
Putty Software - https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
Physical Installation & Configuration
By following this process, you will be able to insert the Galooli solution parameters into the Ultragate memory, as well as configure the Ultragate gateway to work with the Galooli solution platform.
Step 1
...
Connect the keyboard and the mouse to the Ultragate.
...
Connect the HDMI cable between the Ultragate and the computer screen.
...
- Network Connection
There are two connection options for integrating the gateway into the network:
ETH Connection - Connect the first RJ45 cable to the “ETH0” (service port) and to the router (Provides DHCP Connection)
...
and connect the second RJ45 cable to the “ETH1” (main port) and to the computer for further configurations.
...
Connect the Ultragate gateway to power.
...
Make sure that the computer screen is powered and the Ultragate wizard is in progress.
...
Click on the upper left corner >> “Terminal Emulator”
...
Type "ifconfig" in the "Terminal Emulator" wizard. The system will display the Ultragate IP address as a result of this action. Locate the IP address by scrolling all the way up and copy the IP.
...
Step 2
You will perform this step on your computer that is connected to the Ultragate gateway
Download and open the "Putty" software, and enter the IP address of the Ultragate that you saved in the previous step.
...
You will be prompted to enter the following login information in a new window:
login as: root
root@192.168.1.5’s password: 123456 (the password is invisible).
Click “Enter”
...
At that point, progress will begin. In order to write a new command, you must press the combination "Ctrl C".
...
It is now necessary to write the Galooli command at the location shown in the image above. Simply copy the command and right click it in the location (right click = paste).
The command:
sudo wget https://galooli-public.s3.amazonaws.com/usr/install-v0101-d120924/installer.sh && chmod +x installer.sh && ./installer.sh
| Note |
|---|
In some cases, the system may display an error message that reads "Waiting for cache lock" indicating that the configuration cannot be completed. It is necessary to press the combination "Ctrl C" again and type "reboot" in order to resolve the issue. Press “Enter” |
...
Wait at least 5 minutes and then reopen the "Putty" software, enter the IP, the login and password, and enter the command and the process will continue. This process will take another 5-10 minutes. In the end of the process the wizard window will close automatically.
...
Close the “Putty” software.
Step 3
...
OR
SIM Card Connection - Insert the SIM card into the SIM slot and connect the appropriate Ethernet cable according to the device type.
...
Step 2 - Power Connection
Connect the Ultragate gateway to power (12V)
...
Step 3 - IP/Unit Configuration
In the Ethernet properties of your computer, please configure the static IP address of the computer so that it matches the Ultragate device's IP address range.
Control Panel >> Network and Internet >> Network and Sharing Center >> Change Adapter Settings >> >> Choose the relevant Ethernet network >> Locate “Internet protocol Version X (TCP/IPv4) >> Enter the following data:
As an example:Ultragate = 192.168.100.55 (LAN 1)
IP address = 192.168.100.58
Subnet mask = 255.255.255.0
...
Open any browser and type 192.168.100.55 IP (Port 2) to access the Ultragate gateway via the Galooli portal.
| Info |
|---|
Defaulted IP:
|
Enter the following username and password after the Galooli portal appears on the screen:
User name -
...
Please contact Galooli's support - Galooli Support
Password
...
- Please contact Galooli's support - Galooli Support
...
Click on the "Registration" button
| Tip |
|---|
The username and password that you should use to access are your Galooli platform username (Email) and password. For global users please add the name of the organization after the username (Email). |
...
Upon completion of this process, the system will perform an automatic reset. Please log in again.
Copy the Device ID
...
and save it.
...
Click on "Configuration" >> “Download” >> Open the file gib file >> Locate the "apn" row and verify that the APN is correct. If not, write the appropriate APN and save the file.
...
Click on "Configuration" and upload the configuration file you downloaded in the previous step (gib file) to the “Parameters file” row.
...
Click on “System” and then click on "Application Reset". You will be disconnected from the Galooli portal as a result of this action. Refresh the page after two minutes and log in again.
...
Afterward, go to "Status" and ensure that the host is "True" and you will see all digital and analog devices connected to the Axiomtek.
...
Open the Galooli Solution >> Manager Application >> Create a new unit with the Device ID you
...
copied. A detailed description of the unit creation can be found in the https://galooli.atlassian.net/l/cp/UP1dke1b menu knowledge document.
Once you have created the unit, ensure that you can see the unit on the Panorama application Galooli Panorama
Step 4 - Power Center Configuration
Once the Ultragate unit is visible in the Panorama application, you should start connecting the various devices & sensors directly to the Ultragate gateway or to the Galooli tray/metal box. Documentation regarding the installation and configuration can be found at the following links:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
In order to connect the Ultragate analog/digital inputs to the Galooli Tray/Metal box inputs, the connections should be made in a specific order motioned in the following link. https://galooli.atlassian.net/wiki/spaces/KP/pages/3369336833/Ultragate+Gateway#Pinout |
Existing Unit Configuration
...