...
Type "ifconfig" in the "Terminal Emulator" wizard. The system will display the Ultragate IP address as a result of this action. Locate the IP address by scrolling all the way up and copy the IP.
...
Step 2
You will perform this step on your computer that is connected to the Ultragate gateway
Download and open the "Putty" software, and enter the IP address of the Ultragate that you saved in the previous step.
...
At that point, progress will begin. In order to write a new command, you must click press the combination "Ctrl C".
...
It is now necessary to write the Galooli command at the location shown in the image above. Simply copy the command and right click it in the location (right click = paste).
The command:
sudo wget https://galooli-public.s3.amazonaws.com/usr/install-v0101-d120924/installer.sh && chmod +x installer.sh && ./installer.sh
| Note |
|---|
In some cases, the system may display an error message that reads "Waiting for cache lock" indicating that the configuration cannot be completed. It is necessary to click press the combination "Ctrl C" again and type "reboot" in order to resolve the issue. Press “Enter” |
...