Page Comparison

...

Before you get started make sure you have the following:

• Battery Cell Monitoring kitKit:-

  • Battery Cell Monitoring HUB

  -

  • Battery Cell Monitoring Sensor (2/12 V)

  -

  • Battery Cell Monitoring Hall Sensor

  -Different

  • There are different adapters and cables included in the Battery Cell Monitoring Kit

• Elara gateway

• Power source to the Elara gateway of 12V

• Power cables for the Elara gateway - two cables with a thickness of 0.5mm. The length of the cables is determined by the distance between the power source and the Elara gateway

• Lead acid batteries

• The power source of 24VDC or 48VDC to power the Battery Cell Monitoring HUBElectrical wires

• Communication cables. Cables with a thickness of 0.5mm. The length of the cables is determined by the distance between the sensors and the surrounding environment

• Ethernet wire

• Electronic tools – screwdriver, multimeter, & f-crimp tool

• RS485 To USB Converter & two 0.5mm thick communication cables. The length of the cables is determined by the distance between the RS485 to the USB converter and the computer

 Additional information:

• The Battery Cell Monitoring HUB and the Elara are designed to be installed on a din rail

...

Note! Make sure your computer recognizes the COM port at the “Device manager”Manager”. Otherwise, install the proper driver.

...