Page Comparison

...

Before you get started make sure you have the following:

• Project’s Wiring diagram - Provided by Galooli Support

• CE Transducer CE42 MeterBattery Cell Monitoring kit:
  -Battery Cell Monitoring HUB
  -Battery Cell Monitoring Sensor (2/12 V)
  -Battery Cell Monitoring Hall Sensor

• Elara unit

• The power source of +12V DC to power the Galooli RTU (Elara)

• Electrical wires

• Electronic tools – screwdriver, Multimeter, & f-crimp tool

...

• The device is designed to be installed on a din rail

• Make sure that you have sufficient space for its mounting

• We recommend mounting the AC meter next to phase breakers - this act can simplify the process of disconnecting the cables from the breakers, passing the load cables through the meter, and then connecting them back to the breakers

Configuration Preparation

• PC or laptop computer

• Power Center installed - Click here to download. Credential info can be received from your Account Manager or Galooli support

• ZonMax installed - Click here to download. Credential info can be received from your Account Manager or Galooli support

• Download the Battery Cell Monitoring Internal Software (PBMS2000 Monitoring Software)

• RS485 to USB converter - Refer here for driver installation instructions.Project’s Wiring diagram - Provided by Galooli Support.

Note! Make sure your computer recognizes the COM port at the “Device manager”. Otherwise, install the proper driver.

...