Page Comparison

Start Distance [Km]

End Distance [Km]

Start Engine Hours

End Engine Hours

Work Start Time

Work End Time

Work Start Address

Work End Address

Over Speed Threshold

Over Speed Time

For mobile units, the total time unit's speed was above the speed threshold. For telecom or stationary units, the value is 0.

Comments regarding availability as mentiond at the mentmentionedthe “Over Speed Distance” also apply.

Over Speed Distance

For mobile units, the total distance the unit travelled while the unit's speed was above the speed threshold. For telecom or stationary units, the value is 0.

The difference will not be aggregated if the distance difference is less than 0 or more than 2000 km.

The availability time is calculated by accumulating the time between records where the relevant asset was connected. The time will be accumulated only if the time difference between the subsequent records is less than 15 minutes. For Kentrox units, the time difference limit is 30 minutes. In addition, if the calculated availability value is larger than the Data Availability value, the value will be assigned with the Data Availability value.

Text Messages Count

Billing Text Messages

Transmission Count

Distance Travelled [Km]

Total Distance that was travelled

The sum of all the differences between the distance in every 2 subsequent records. The difference will not be aggregated if the distance difference is less than 0 or more than 2000 km

Comments regarding availability as mentiond at the mentmentionedthe “Over Speed Distance” also apply.

Average Distance per Trip [Km]

The sum of all the distance that was travelled in all the trips divided diviwas ded by the number of trips.

Comments regarding availability as mentiond at the mentmentionedthe “Over Speed Distance” also apply.

Total Engine Hours

Total Engine Hours

The sum of all the differences between the engine hours in every 2 subsequent records. The difference will not be aggregated if the difference in the engine hours is larger than the time difference in more than 5 minutes.

Comments regarding availability as mentiond at the mentmentionedthe “Over Speed Distance” also apply.

Daily Average Engine Hours

Average Time Per Trip

Average Trip Speed [Km/H]

Maximum Speed [Km/H]

Total On Time/Total On Time [Num]*

Total time the engine was on. For vehicles, this is the summation of the moving time, stop time and the idle time.

summation of the moving time, stop time and the idle time.

Comments regarding availability as mentiond at the mentmentionedthe “Over Speed Distance” also apply.

Total Off Time/Total Off Time [Num]*

For mobile units, the total time the unit was off. For telecom or stationary units, this is the total time the unit was not on (moving, stop, idle)

Comments regarding availability as mentiond asmentionedd at the “Over Speed Distance” also apply.

Total Stop Time/Total Stop Time [Num]*

For mobile units, the total time the unit was in "stop" status. For telecom or stationary units, this is the total time the unit was in "stop" or "on" status.

Total Idle TimeTotal/Idle Time [Num]*

For mobile units, the total time the unit was in "idle" status. For telecom or stationary units, the value is 0.

Comments regarding availability as mentiond asmentionedd at the “Over Speed Distance” also apply.

Total Standing Time/Total Standing Time [Num]*

Sum of "Total Stop Time" and "Total Idle Time".

Comments regarding availability as mentiond asmentionedd at the “Over Speed Distance” also apply.

Total Moving Time/Total Moving Time [Num]*

For mobile units, the total time the unit was in "moving" status. For telecom or stationary units, the value is 0.

Comments regarding availability as mentiond asmentionedd at the “Over Speed Distance” also apply.

Total Working Time

Total On Time [Num]

Sum of "Total Stop Time", "Total Idle Time" and "Total Moving Time".

Comments regarding availability as mentiond at the “Over Speed Distance” also apply.

Total Off Time [Num]

Total Stop Time [Num]

Total Idle Time [Num]

Total Moving Time [Num]

/Total Working Time [Num]*

Total Standing Time [Num]

No. Of Trips

Total Distance In POI [Km]

Total distance travelled continuously in some POI configured for the unit.

The sum of all the differences between the distance in every 2 subsequent records, if in both records the unit is inside some POI. The difference will not be aggregated if the distance difference is less than 0 or more than 2000 km.

Comments regarding availability as mentiond asmentionedd at the “Over Speed Distance” also apply.

Total Time In POI

Total Distance Not In POI [Km]

The difference between Distance Travelled and Total Distance in POI.

Total Time Not In POI

Total Days

Available DaysAvailable Days