Skip to end of banner
Go to start of banner

Battery Cell Monitoring - Elara Configuration

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 5 Next »

In the event that a preliminary configuration process between Elara and the rectifier has already been completed, proceed to the “Adding Modbus ETH Dives” section listed below.

If the configuration process between Elara and the rectifier is not necessary, change the IP address manually before proceeding to the “Adding Modbus ETH Dives”.

  1. Double-click the “Network” row

2. Change the data settings to the following values:
Network Mask - 255.255.255.0
Network Gateway - 192.168.8.1
Elara IP - 192.168.8.101

3. Click on “Write Configuration”

Adding Modbus ETH Dives

  • No labels