The latest version of the Galooli Gateways includes features that reflect an open dialogue with our customers and Galooli’s desire to facilitate and improve hardware usage. This article contains information about the main features.
ELARA CAN Bus Communication Support
The Elara gateway now supports CAN Bus communication (J1939 protocol) which allows a direct connection to the generator engine without the need for a generator control panel.For these capabilities to be achieved, it is necessary to:
Use specific Elara hardware - https://galooli.atlassian.net/l/cp/1WA7WePt
Make sure the Elara version is at least 02.02.40.
The device should be added via Power Center
Elara Global Configuration Updates
Due to a lack of usage, the "Port Route" was removed.
The "checkboxes" section has been moved to a more appropriate location.
Full Document - Power Center Elara Global Configuration
CAN Silent Mode
In this mode, Elara CAN prevents data from being sent to the engine control unit, whether it is a direct connection to the engine or a connection to the generator panel.This mode can therefore be activated if the user wishes to have the unit only "listen" to the communication line.
As this mode may affect the connectivity between the CAN and the unit, it is not Galooli default.
Full Document - Power Center Elara Global Configuration
GPS – HDOP & Altitude added
DATAKOM – Alarms integration
BIT improvements to detect SD corruption at the factory