Durable, indoor tray that can host a DC-DC converter, Galooli gateway, and extensions with terminal blocks connection for easy wiring and quicker installation time.
The Cabinet Tray is designed to be installed in a standard cabinet (19’’ width and 2U height).
Technical Specification | |
Size | 41cm X 40cm X 8cm |
Weight | 7 kg |
Standards and Certification |
|
Galooli PN | Gateway |
|---|---|
400-ElaraTry2USET-507 | Elara |
400-AXITry2U-5071 | Axiomtek |
400-UltraTry2U-5071 | Ultragate |
400-TehTry2U-5071 | Techbase |
Cabinet Tray Layout
In telecom sites we have many sensors and panels, therefore, we created this efficient tray, to help manage all the wires, and to be on top of things.
Main Input Fuse
This is the main fuse and input of electricity for the tray, it can receive from +18VDC to +75VDC, the main fuse need to be connected to the DC to DC power converter.
DC to DC converter
The converter converts the input voltage (18VDC-75VDC) to +12V, since most of the sensors and devices, including the gateways, are working on +12VDC.
Grounding
Grounding is made to protect the sensitive electrical equipment in the tray, the grounding resistance should not be more than 5Ω.
Wiring Ducts
Wiring ducts are made for cable organization, all the cables from the sensors & devices on the site are designed to go through these wiring ducts.
GND & +12V Terminal
Extension terminal for GND and +12V power.
These are the main power slots for all the consumers in the tray, it is receiving power from the DC to DC converter.
Any device in the tray should consume power only from the terminal blocks.
RS485 Terminal
Extension terminal for the gateway RS485 port, to provide a serial connection between the gateway and the other devices and sensors on the site.
The orange terminal is for Port A and the blue wires are for Port B
Gateway Slot
The gateway slot is a place for the gateway on the din rail, with the exact length of the green connectors, dedicated for the gateway.
EX20-1/2 Slot
The EX20-1/2 (Extension Devices) slot is a place for the EX20 on the din rail, with the exact length of the green connectors, dedicated for the EX20.
Gateway & EX20-1/2 Terminal
All the inputs & outputs of the gateway & EX20 are extended to the gray terminal, to have organized & comfortable connections to the devices.
Each input in the gray terminal directly extends the actual input in the gateway or EX20.
Hatch Sensor
The Hatch Sensor exists to indicate if the tray is opened.
As a convention, it always will be connected to the 5th input of the gateway.
An example of a fully installed tray with the Elara gateway:
