The Rectifier card illustrates how the rectifier is used on the site. Only if the rectifier is configured and Rectifier_1.Device_Type is not "Unknown" then the card appears on the screen.
Main View
The Subtitle - Rectifier model (Rectifier_1.Device Type)
Disconnected icon - appears if Rectifier_1.Disconnected is true
Alarms indication and number - Don't count Rectifier_1. Alarm Critical, Rectifier_1.Alarm_Urgent, Rectifier_1.Alarm_Non_Urgent, Rectifier_1.Alarm_Indication, Rectifier_1.Alarm_Active
System Voltage
System Current
Battery Current
Expanded View
System
System Voltage (U_System)
Load Current (Rectifier_1.I_Load)
Rectifier Current (Rectifier_1.I_Rectifier)
Total Load Energy (Rectifier_1.Total_KWH) (Precision 0)
Gen Signal (Rectifier_1.DG_Signal)
Internal Temperature (Rectifier_1.Temperature_Internal)
Ambient Temperature (Rectifier_1.Temperature_Ambient)
Battery
Current (Rectifier_1.I_Battery)
SOC (Rectifier_1.State_of_Charge) (Precision 0)
Temperature 1 (Rectifier_1.Temperature_Battery)
Temperature 2 (Rectifier_1.Temperature2_Battery)
Solar - appears only if the site layout includes "SOLAR"
Solar Power
Solar Total Power
Solar Modules - Voltage, Current (Rectifier_1.Solar_Voltage_1..4, Rectifier_1.Solar_Current_1..4).
There will be no display of solar modules where both Solar_Voltage_X and Solar_Current_X are zero
Modules - Voltage, Current, Temperature - (Rectifier_1.Module_Voltage_1..12, Rectifier_1.Module_Current_1..12, Rectifier_1.Module_Temperature_1..12)
There will be no display of solar modules where both Module_Voltage_X and Module_Current_X and Module_Temperature_X are zero.
Alarms - active digitals with colors according to the severity
