Skip to end of banner
Go to start of banner

K2 Installation and Configuration (Vehicle)

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Serial Connection to Computer

Basic Vehicle Installation Video

The following parts are included in this video:

  • Required installation equipment.

    • Aside from the equipment described in the video, it is important to ensure that the unit contains an active SIM card and the harness connector with cables.

  • Connection to power.

  • Connection to ignition system.

  • Immobilizer connection.

  • LED’s indication.

https://www.youtube.com/watch?v=NE8bn4TcdgU&list=PL6jYON57NnXzHbXYUB9yWl-O61sHv_GPd&index=2&ab_channel=Galooli

Two Fuel Tanks Installation

These instructions apply to both the connection of the K2 gateway to an external fuel sensor like (and the connection of the unit to an internal fuel sensor

  • No labels