Site Global AC Tenants Load Power [W] 

Summary of the Tenant_X.Power fields when the tenant is configured (Tenant_X.Configured = True) and the AC Meter is not configured for the tenant (TenantX.AC_Meter = False).

Note: The field included all tenants who met the criteria above

Site Global DC Tenants Load Power [W]

Summary of the Tenant_X.Power fields when the tenant is configured (Tenant_X.Configured = True) and the AC Meter is not configured for the tenant (TenantX.AC_Meter = False).

Note: The field included all tenants who met the criteria above

Rectifier_X.Communication_Rectifier_Modules

This field indicates the number of modules that are actually communicating with the rectifier. As an example, on a specific site there may be five solar modules that produce X [KW], but only three of them transmit information to the rectifier, so the value reported in the report is smaller than the actual value produced. These fields will enable to investigate the exception.

Rectifier_X.Communication_Solar_Modules

Rectifier_X.Total_Load_Energy [KWH]

Rectifier_X.Used_Load

Calculation of the load percentage on a rectifier in relation to its capacity.

 Rectifier_X.Used_Load will only provide results to customers for whom the X-Ray is active (in particular, platinum licensees).

The field is based on an X-Ray data that added to the system called Rectifier (1-5) Module Type, which specifies the model of rectifier modules. Using the model, the maximum capacity of each module is determined, which is multiplied by the number of active modules to calculate the total capacity of the rectifier. In this way, the user will be able to determine whether or not the rectifier is being used optimally in relation to the site's load.