The ethernet cable should be connected to the left socket (LAN1 - eth0) of the Techbase NPE X500 M3 and to the computer at the other end.
2. On your computer, set a static IP address of 192.168.1.10.
3. Enter the following IP address in the URL line of your browser - 192.168.1.11.
4. Please enter the following username and password:
User name - galooli
Password - galooli
5. When you have successfully entered the site, please click on the "Registration" button.
The username and password that you should use to access are your Galooli platforms username (Email) and password.
For global users please add the name of the organization after the username (Email).
Techbase will be automatically updated to the latest version upon registration to the Galooli platform. After registering, the process will take approximately 10 minutes to complete.
6. As soon as you have entered your credentials successfully, please click on "System", then "Application Reset", and ensure that the status of your registration is "Valid".
Status | Meaning |
|---|---|
Valid | Registration was completed successfully |
Missing | The status before the registration |
Failed | Registration failed. Please try again to register |
7. Please click on "Configuration" and upload the configuration file you created in the previous step (gib file) to the “Parameters file” row.
8. In order to obtain an indication of the progress of the upload, go to "System" and ensure that all the parameters are correct and valid
Afterward, go to "Status" and ensure that the host is "True" and you will see all digital and analog devices connected to the Techbase NPE X500 M3. Verify that the sensors on the list are the same sensors you configured in the Power Center.
If the information is not displayed, you should upload the file again and then click "Application Reset".
9. Copy the unit ID
10. As soon as you have successfully completed all the steps, you can move on to the next step - Techbase NPE X500 M3 Unit Creation.