On the dashboard you can see the generators' performance, including expenses associated with fuel and maintenance, aspects of generator efficiency and possible causes - such as an inefficient load.
Key Takeways:
Fuel cost calculation based on actual consumption.
Generator maintenance cost calculation, based on generators actual runtime.
Proper generator sizing for load requirements
Generators efficiency rates, and identification of the most inefficient generators.
In order to match the data to the specific equipment which is being used by your organization, it is important to perform data matching before running the report. Without doing this action Galooli will rely on default data as defined below.
No. of Sites with Generators
The number of sites with at least one configured generator.
Total Fuel Cost
The total fuel cost based on the fuel consumption during the selected time period. The cost per liter/gallon can be configured by the user. If there is no configured value, the dahsboard uses a default value of 0.78$ per liter.
Total Maintenance Cost
The total cost of maintenance visits based on the generators run time. The cost is calculated as the price per generator maintenance visit, and engine hours for which a maintenance visit is required: visit cost*total engine hours/hours of maintenance.
The price per visit for generator maintenance, and the engine hours for which the visit is required, can be configured by the user. If there is no configured value, the dashboard uses a defualt values of 250 cycle hours for periodic maintenance, and 90$ per maintenance visit cost.
Total Engine Hours
Total generators run time for the selected time period. Based on the summary fields "Avail. Time DG1" and "Avail Time DG2" (https://galooli.atlassian.net/wiki/spaces/KP/pages/2861563909/Energy+Global+Fields)
Fuel
The total amount of fuel consumed, refuled, and the total amout of fuel drops.