Installation Preparation
Fuel tank (20L or 5.3 US gallons)
Fuel hand pump
The calibration tube will be assembled by the client
RS485 USB to serial configuration cable and adaptor
Assorted pair of screwdrivers
¾ inch hollow copper rod
Measuring tape
Zip-ties
35mm (1.4”) Bi-metal hole saw.
Power drill
Diesel fuel
Junction box – we recommend at least IP 65
Configuration Preparation
PC or laptop computer
Power Center installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
ZonMax installed - Click here to download. Credential info can be received from your Account Manager or Galooli support
RS485 to USB converter - Refer here for driver installation instructions
Project’s Wiring diagram - Provided by Galooli Support
Note! Make sure your computer recognizes the COM port at the “Device manager”. Otherwise, install the proper driver.