Before performing an initial integration process with the SDK, it is very important to perform three functional tests as described in the following document.
Test 1 - Sys_Test
The goal of this test is to ensure that you are able to communicate with the server. You will receive an IP address as the answer from the server support, which indicates that the test is valid.
https://sdk.galooli-systems.com.galooli-systems.com/json/sys_Test?userName=[MY USER]&password=[MY PASSWORD]
Test 2 - Sys_TestEcho
The purpose of this test is to ensure that the system correctly responds to parameters entered by checking that the parameters have been received and sent.
Write down the test word after the = symbol, and you will see the same word in the test results, indicating that the test is valid.
https://sdk.galooli-systems.com.galooli-systems.com/Json/sys_TestEcho?userName=[MY USER]&password=[MY PASSWORD]&str=test
Test 3 - Sys_VerifyUser
It is the purpose of this test to verify the accuracy of the user, the IP address, and the max allowed requested interval
Upon completion of the test, you will receive the user name, IP address, and the maximum allowed requested interval, which indicates that the test was successful.
https://sdk.galooli-systems.com.galooli-systems.com/Json/sys_VerifyUser?userName=[MY USER]&password=[MY PASSWORD]