Lesson Highlights

Name of the lesson

Stationary Assets Installation & Configuration Flow

Purpose of the lesson

The objective of this lesson is to provide the user with a detailed description of the installation and configuration processes that must be followed in order to maximize the potential of Galooli stationary gateways and Galooli software.

Target Audience

End-users of the system such as technicians, service providers, back-office, organization managers, etc.

It is highly recommended to go through the contents in the order in which they appear.

Installation Form

TBA

Checkout Form

TBA

Configurations Process

The configuration process of a new gateway in an organization is a crucial step in receiving proper data from the gateway and obtaining the maximum amount of accurate data from the Galooli solution.

There are several steps involved in the configuration process. Some are the same for all gateways, while others are specific to each gateway. Follow the instructions carefully in order to avoid missing important details.

Power Center Basic Configuration

Step 1 - Connection to Power Center

To perform configuration through the Power Center platform, it is necessary to connect to the gateway. Depending on the type of gateway, the connection can be physical (Serial) or over the air (OTA). Please refer to the following link for details regarding each Gateway connection method - Stationary Asset Gateways

Step 2 - Basic Configuration

TBA

Galooli Solution Basic Configuration

Organization Tree

Open the Galooli Solution >> Click on the “Manager” application >> Click on “My Units” >> It is recommended that you create meaningful clusters and groups in your organization tree that will assist you in managing all future units. My Units

Unit Configuration

Open the Galooli Solution >> Click on the “Manager” application >> Click on “My Units” >> Locate the relevant unit within the "Stock" cluster and click on it.

In the event that you own an active gateway in your organization, you can copy all or part of the configurations to the new gateway using the following ways:

Step 1 - Copy Settings

Copy settings via the organizational KPI tool - https://galooli.atlassian.net/wiki/spaces/KP/pages/2802450433/My+Units#Copy-Settings. It is important to note that this new gateway will automatically receive the relevant configurations if your organization has an organizational KPI configured.
Copy Settings via the unit level tool - Copy Settings
Clone Unit - https://galooli.atlassian.net/wiki/spaces/KP/pages/2830401537/My+Unit#Clone-Unit

If this is the organization's first gateway, please follow the steps below.

Step 2 - Manual Configuration

Locate the relevant unit within the "Stock" cluster and click on it. My Unit
The "Overview" tab should be used to give the unit a name, a description, and an asset type. Set the "Stationary Unit" to "Yes". Set the destination Email and SMS. Email and phone numbers can be set at the cluster or group level as opposed to the unit level. The remainder of the information can be filled in as needed. https://galooli.atlassian.net/l/cp/GUAkk1K4
On the "Configuration" tab >> Click on the “IO’s” submenu >> Add inputs and outputs, followed by calibration tables. On the basis of the IO’s settings, it will be possible to define events in the system later on. https://galooli.atlassian.net/l/cp/sfiBfhtN
On the “Configuration” tab >> Choose the “Device Configuration” submenu >> Choose the layout code appropriate to the type of the site. In the same place make any necessary display configurations. https://galooli.atlassian.net/l/cp/qJHywnNj
On the "Configuration” tab >> Select the “Maintenance", set the relevant maintenance dates.
Maintenance
On the "Configuration" tab >> Choose “KPI” submenu, set all the relevant fields and thresholds that affect dashboards and reports in terms of alerts and calculations. KPI
On the "Events" tab, add the relevant events.https://galooli.atlassian.net/l/cp/zjX0vNmg
On the "Information" tab >> Choose the “Unit” submenu >> Select the “Hardware” section >> Enter the "SIM Phone Number" and "SIM Serial Number". https://galooli.atlassian.net/wiki/spaces/KP/pages/2830041108/Information#Unit
On the "Information" tab >> Choose the “Additional Information” submenu >> It is important to add additional information about the unit in order to display relevant information. https://galooli.atlassian.net/wiki/spaces/KP/pages/2830041108/Information#Additional-Information
Click on “Save”
Transfer the unit from the "Stock" cluster to another relevant cluster. https://galooli.atlassian.net/l/cp/J6c4DHE1
Verify that the unit can be seen on the Panorama map and that the Panorama time stamp is being updated.https://galooli.atlassian.net/l/cp/hth1o23t

As each gateway includes unique configuration processes, it is highly recommended that you review the knowledge documents of the gateway in question to ensure that your configurations are in accordance with them.
Stationary Asset Gateways