Page Comparison

The latest version of the Galooli Gateways Elara Gateway includes features that reflect an open dialogue with our customers and Galooli’s desire to facilitate and improve hardware usage. This article contains information about the main features.

• ELARA CAN Bus Communication Support
  The Elara gateway now supports CAN Bus communication (J1939 protocol) which allows a direct connection to the generator engine without the need for a generator control panel.

  For these capabilities to be achieved, it is necessary to:

  • Use specific Elara hardware - https://galooli.atlassian.net/l/cp/1WA7WePt

  • Make sure the Elara version is at least 02.02.40.

  • The device should be added via Power Center

    Image Added

• Elara Global Configuration Updates

  • Due to a lack of usage, the "Port Route" was removed.

  • The "checkboxes" section has been moved to a more appropriate location.

  • The “CAN Silent Mode” has been added to the “Global” section, which is related to Elara's new CAN Bus communication method.

Full Document - Power Center Elara Global Configuration

...

...

• ELARA CAN Bus Communication Support

The Elara gateway now supports CAN Bus communication (J1939 protocol). בכדי

1. דורש חומרה מיוחדת (CAN HW)

2. גרסת Elara 02.02.40  ומעלה (תמיכה בשני סוגי גרסאות החומרה. אין גרסה יעודית)

3. תמיכה מלאה בCAN Silent mode (ההמלצה שלי היא דווקא לא להשתמש במנגנון הזה, אבל זה יאפשר להשתשמ בcontactless CAN reader, מניח שיהיו לקוחות שיתעקשו)

4. נוספו דיפולטים עבור

   1. חיבור "נקי" למחשב המנוע (ללא פאנל)

4. תמיכה בפאנלים מסוג PowerWizard

PowerWizard 1.1-2.1

PowerWizard MCP4.1-4.2

• Silent Mode
  In this mode, Elara CAN prevents data from being sent to the engine control unit, whether it is a direct connection to the engine or a connection to the generator panel.

  This mode can therefore be activated if the user wishes to have the unit only "listen" to the communication line.

  As this mode may affect the connectivity between the CAN and the unit, it is not Galooli default.
  
  Full Document - Power Center Elara Global Configuration
  

  Image Added

• GPS – HDOP & Altitude added

• DATAKOM – Alarms integration

• BIT improvements to detect SD corruption at the factory