Before performing an initial integration process with Prior to integrating the SDK , it is very important to perform three functional tests as described in the following document.
Test 1 - Sys_Test
for the first time, there are a number of tests that can be helpful in understanding the errors that might be encountered.
Sys_Test
The goal of this test is to ensure that you are able to communicate with the serverGalooli Cloud/ Service. You will receive an IP address as the answer from the server Galooli Cloud/ Service support, which indicates that the test is valid.
| Code Block |
|---|
https://sdk.galooli-systems.com.galooli-systems.com/json/sys_Test?userName=[MY USER]&password=[MY PASSWORD] |
...
Sys_TestEcho
The purpose of this test is to ensure that the system correctly responds to parameters entered by checking that the parameters have been received and sent.
Write down the test word after the = symbol, and you will see the same word in the test results, indicating that the test is valid.
| Code Block |
|---|
https://sdk.galooli-systems.com.galooli-systems.com/Json/sys_TestEcho?userName=[MY USER]&password=[MY PASSWORD]&str=[test] |
...
Sys_VerifyUser
It is the purpose of this test to verify the accuracy of the user, the IP address, and the max allowed requested interval
...
| Code Block |
|---|
https://sdk.galooli-systems.com.galooli-systems.com/Json/sys_VerifyUser?userName=[MY USER]&password=[MY PASSWORD] |
Expected Result
Sys_Test
| Code Block |
|---|
Test. [IP NUMBER] |
Sys_TestEcho
| Code Block |
|---|
[Test Word] |
Sys_VerifyUser
| Code Block |
|---|
User [MY USER] @ IP Source [IP ADDRESS] is valid ,max allowed requested interval : [X sec] |